HP5200 Printer Setup Network Printing Frequently Asked Questions

HP5200 Printer Setup Network Printing

                                    HP5200

Printer Setup Network Printing

IP

Address

HP5200

Printer from the control panel to manually configure

TCP

/

IP

Parameters using manual configuration settings

ip

Address,

Subnet mask, and default gateway.



Set up

ip

Address

    1.

Press the Menu.

    2.

Press

▼

Configure the device to highlight, and then press

√

.

    3.

Press

▼

To highlight

i / o

, And then press

√

.

    4.

Press

▼

To highlight EMBEDDED

jetdirect

, And then press

√

.

    5.

Press

▼

To highlight

tcp / ip

, And then press

√

.

    6.

Press

▼

To highlight MANUAL SETTINGS, and then press

√

.

    7.

Press

▼

To highlight

ip

Address:

, And then press

√

.

    8.

Press

▲

Or

▼

Arrow, to increase or decrease

ip

The value of the address of the first set of numbers.



To speed up the the digital scrolling speed, continue to hold down the arrow button.

    10.

Repeat step

8

And

9

Until you enter the correct

ip

Address, and then save the settings.

    11.

Press menu to return to the Ready state.



Set the subnet mask

    1.

Press the Menu.

    2.

Press

▼

Configure the device to highlight, and then press

√

.

    3.

Press

▼

To highlight

i / o

, And then press

√

.

    4.

Press

▼

To highlight EMBEDDED

jetdirect

, And then press

√

.

    5.

Press

▼

To highlight

tcp / ip

, And then press

√

.

    6.

Press

▼

To highlight MANUAL SETTINGS, and then press

√

.

    7.

Press

▼

To highlight Subnet Mask, and then press

√

.

    8.

Press

▲

Or

▼

Arrows to increase or decrease the value of the subnet mask, the first set of numbers.



    10.

Repeat step

8

And

9

Until you enter the correct subnet mask, and then press

√

Save the subnet mask.

    11.

Press menu to return to the Ready state.



Set the default gateway

    1.

Press the Menu.

    2.

Press

▼

Configure the device, and then press to highlight.

    3.

Press

▼

To highlight

i / o

, And then press.

    4.

Press

▼

To highlight EMBEDDED

jetdirect

, And then press.

    5.

Press

▼

To highlight

tcp / ip

, And then press.

    6.

Press

▼

To highlight MANUAL SETTINGS, and then press.

    7.

Press

▼

Default gateway, and then press to highlight.

    8.

Press

▲

Or

▼

Arrows to increase or decrease the value of the default gateway of the first set of numbers.



    10.

Repeat step

8

And

9

Until you enter the correct default gateway, and then press

√

Save the default gateway.

    11.

Press menu to return to the Ready state. Disable network protocols (optional) in the factory default settings, enable the

Supported network protocols. Disable unused protocols has the following benefits:

    1

Reduce the amount of network traffic generated by the printer

    2

To prevent unauthorized users from unauthorized printing to the printer

    3

Only to provide relevant information on the configuration page

    4

Allows the printer control panel to display protocol-specific error and warning messages



Disable

ipx / spx



If based on

windows

System through

ipx / spx

Print this printer

Do not disable this Association

Meeting.

    1.

Press the Menu.

    2.

Press

▼

Configure the device to highlight, and then press

√

.

    3.

Press

▼

To highlight

i / o

, And then press

√

.

    4.

Press

▼

To highlight EMBEDDED

jetdirect

, And then press

√

.

    5.

Press

▼

To highlight

ipx / spx

, And then press

√

.

    6.

Press

√

To select Enable.

    7.

Press

▼

To highlight OFF, and then press

√

.

    8.

Press menu to return to the Ready state.



Disable

appletalk

    1.

Press the Menu.

    2.

Press

▼

Configure the device to highlight, and then press

√

.

    3.

Press

▼

To highlight

i / o

, And then press

√

.

    4.

Press

▼

To highlight EMBEDDED

jetdirect

, And then press

√

.

    5.

Press

▼

To highlight

appletalk

, And then press

√

.

    6.

Press

√

To select Enable.

    7.

Press

▼

To highlight OFF, and then press

√

.

    8.

Press menu to return to the Ready state.



Disable

dlc / llc

    1.

Press the Menu.

    2.

Press

▼

Configure the device to highlight, and then press

√

.

    3.

Press

▼

To highlight

i / o

, And then press

√

.

    4.

Press

▼

To highlight EMBEDDED

jetdirect

, And then press

√

.

    5.

Press

▼

To highlight

dlc / llc

, And then press

√

.

    6.

Press

√

To select Enable.

    7.

Press

▼

To highlight OFF, and then press

√

.

    8.

Press menu to return to the Ready state. Strengthen

I

/

O

(

EIO

)

Configuration If you add the print server to

The basic model, you may need to increase the printer memory.



Enhanced input

/

Export

(Eio)

Slots used to plug in external compatible devices

As

hp jetdirect

Print Services

Is a network card or other device. Insert

eio

NICs can increase the number of network interfaces available on the printer.

    hp jetdirect eio

Print server

    hp jetdirect

Print servers (network cards) can be installed in

eio

Slot. These cards support multiple network

Network protocols and operating systems.

hpjetdirect

Direct access network print server allows the printer at any location

Network to facilitate network management.

hp jetdirect

The print server also supports

'

Simple network management protocol

(Snmp) "

And

Enables network managers to remotely manage printer

And the use of

hp webjetadmin

Soft

Pieces troubleshooting.



You can control panel

Printer installation software or

hp web jetadmin

Software to configure the network card.

For more information, please refer to the

hp jetdirect

Print Server Description