HP Color LaserJet CM6040 MFP Printer Parts

Part Description
Q3938-60132 Scanner  - Entire scanner - Does not include power supply, boards, and cable
CE664-69004  Scanner_Assembly  - Scanner assembly - Does not include power supply, boards, and cable 
Q3938-60161 Scanner_Assembly  - Entire scanner - Does not include power supply, boards, and cable
Q3931-67935 Fixing_Assembly  - 110-127V FIXING ASS Y Kit Part Number 
Q3931-67935 Fixing_Assembly  - 110-127V FIXING ASS Y Kit Part Number 
Q3931-67914 Fuser_Assembly  - Fuser Assembly - For 110 VAC to 127 VAC - Bonds toner to the paper with heat.
Q3931-67915 Fuser_Assembly  - Fussing assembly - For 220 VAC to 240 VAC - Bones toner to the paper with heat
Q3938-67901 Carriage  - Carriage assembly - Holds and positions print cartridges
Q3931-67927 Fuser_Assembly  - Fussing assembly - For 220 VAC to 240 VAC - Bonds toner to the paper with heat
RM1-3244-000CN Fuser_Assembly  - Fuser Assembly - Bonds toner to paper with heat - For 220VAC to 240VAC (+/- 10%) operation
Q3938-67960 PC_Board  - Formatter (main logic) board - For HP Color Laserjet CM6040 series
RM1-3307-040CN Belt  - Intermediate transfer belt (ITB) assembly
Q7720-67951 Memory  - HP 512MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
RM1-3242-000CN Fuser_Assembly  - Fuser Assembly - Bonds toner to paper with heat - For 110VAC to 127VAC (+/- 10%) operation
Q3938-67977 PC_Board  - Formatter (main logic) board - For HP Color Laserjet CM6040 series 
Q3938-67973 Carriage  - Carriage assembly - Holds and positions print cartridges
Q7719-67951 Memory  - HP 256MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
RM2-0190-000CN  Power_Supply  - LOW VOLTAGE POWER SUPPLY ASS Y
RM1-3594-000CN Power_Supply  - Low voltage power supply assembly
RM1-4139-000CN PC_Board  - Main controller PCA assembly - For the stapler/stacker and booklet maker unit
RM1-4178-000CN Saddle  - Saddle stapler assembly
Q3931-67902 Memory  - 128MB, 167MHZ, 200-pin DDR DIMM memory module
RM1-4101-000CN Tray  - Stapler/stacker tray - Upper tray assembly for the stapler/stacker (output bin 1)
Q3931-67907 Scanner_Assembly  - Laser/scanner assembly kit
CC516-69002 Transport_Module  - Intermediate paper transport unit (IPTU) (whole unit)
RM1-4102-000CN Tray  - Upper stack tray assembly (output bin 1) - For the booklet maker unit
CB385-67901 Drum  - HPCOLRLASRJETCYNIMGEDRUM
CB386-67901 Drum  - HPCOLRLASRJETYELOWIMGEDRUM
CB387-67901 Drum  - HPCOLRLASRJETMANTAIMGEDRUM
4G3-0670-000CN Mount  - MOTOR MOUNT ASSEMBLY
Q3938-67965 Transfer_Kit  - Image Transfer Kit 150K 
RM1-3307-000CN Belt  - Intermediate transfer belt (ITB) assembly
CB381-67901 Cartridge  - Cyan print toner cartridge - For the Color LaserJet CP6015 series
CB382-67901 Cartridge  - Yellow print toner cartridge - For the Color LaserJet CP6015 series
CB383-67901 Cartridge  - Magenta print toner cartridge - For the Color LaserJet CP6015 series
RM1-6642-040CN PC_Board  - Replacement for part RM1-6642-000CN DC controller PC board assembly - Mounts on the rear of the print engine frame on the right side of the formatter board 
RM1-6642-090CN PC_Board  - Assembly-DC Controller PCB R1.84 
RM1-6642-000CN PC_Board  - DC controller PC board assembly - Mounts on the rear of the print engine frame on the right side of the formatter board 
RM1-6642-080CN PC_Board  - Assembly-DC Controller PCB R1.84 
Q3938-67963 Panel  - Control panel assembly - Control buttons and display located on top front of printer
5851-2768 Control_Panel  - DISPLAY CONTROL PANEL
Q3938-67910 Power_Supply  - Power supply assembly
Q3931-67911 Drive_Assembly  - Main drive assembly - Mounts on the right side of the printer - Metal plate with gears attached - Also known as main gear drive assembly
RM1-6642-060CN Other_Parts  - DC CONTROLLER PCB ASS'Y
RM1-6642-050CN PC_Board  - DC controller PC board assembly - Mounts on the rear of the print engine frame on the right side of the formatter board
RM1-4105-000CN Tray  - Lower stack tray assembly (output bin 2) - For the stapler/stacker and booklet maker series
Q3938-67902 PC_Board  - Scanner controller-board (SCB) assembly - Provides timing and control for the flatbed scanner
FM2-0721-000CN Stacker_Assembly  - Staple assembly - For stapler/stacker and booklet-maker unit
RM1-4140-000CN PC_Board  - Saddle controller PCA assembly
FL2-0846-000CN Stacker_Assembly  - Stapler unit - Located on the saddle stapler assembly
CB463A Transfer_Kit  - HP Color LaserJet Transfer Kit. CP6015/CM6030/CM6040 TRNFR Kit prints approximately 150, 000 pages 
RM1-4395-000CN Guide  - Intermediate upper feed guide assembly
Q3931-67912 Drive_Assembly  - Toner cartridge drive assembly - Metal plate with gears attached - Provides movement to the cyan and black cartridges
Q3701-60020 PC_Board  - Modem PCA - HP LaserJet analog fax accessory 300
Q3701-60014 Fax_Module  - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter board
FM2-0722-000CN Stapler  - Stapler sub-assembly - Includes upper and lower clinch guide, staple unit and motor (M14), bin sensor flag, photo interrupter (PI46), and staple mount
RM1-4109-000CN Feeder  - Saddle paper feeder assembly - Includes saddle motor assembly and lower entrance guide assembly - For the booklet maker
RM1-3652-000CN Reversing_Unit  - Reversing assembly for duplexer assembly
Q3931-67913 Drive_Assembly  - Toner cartridge drive assembly - Metal plate with gears attached - Provides movement to the yellow and magenta cartridges
RM1-4136-000CN Feeder  - Saddle paper feeder assembly - Includes saddle motor assembly and lower entrance guide assembly - For the stapler/stacker
RM1-3686-000CN Guide  - Intermediate lowerr feed guide assembly
CB384-67901 Cartridge  - Black print toner cartridge - For the Color LaserJet CP6015 series
RM1-3333-000CN Door  - Right door sub assembly
RM1-4125-000CN Tray  - Operation-tray assembly - Includes operational tray cable and photo interrupter (TLP1242)
RM1-3293-000CN Delivery  - Face down paper delivery assembly
Q3938-67978 Hard_Drive  - Hard drive - High performance EIO serial ATA hard drive 
RM1-3665-000CN Feeder  - Duplexing feed assembly
Q3931-67918 Tray  - 500-sheet paper input tray cassette - For use with tray 2
Q3938-67961 Hard_Drive  - Hard drive - High performance EIO serial ATA hard drive
Q7718-67951 Memory  - 128MB, 100-pin, DDR SDRAM DIMM memory module
Q3931-67923 Tray  - 500-sheet paper input tray cassette - For use with Tray 3, 4, or 5
Q3931-67919 Roller  - Paper pick-up roller and retard roller kit - Includes one pick-up roller, one retard roller, and two paper feed rollers - Use with tray 2,3,4, and 5 
Q3931-67938 Roller  - Paper pick-up roller - Includes one pick-up roller, and two paper feed rollers - Use with tray 2,3,4, and 5 
RM1-3529-000CN Tray  - 1 x 500-sheet input tray cassette
RM1-3218-000CN Power_Supply  - Fuser power supply assembly
RM1-5475-000CN PC_Board  - High voltage transfer |B| PCA assembly
RM1-3582-000CN PC_Board  - High voltage transfer |A| PCA assembly
RM1-4119-000CN Cover  - Middle height cover assembly for the booklet maker unit
4G3-0671-000CN Plate  - Inner side plate assembly - Used on the booklet market series only
RM1-4408-000CN Cover  - Rear cover assembly - Plastic cover that protects the rear air duct
RM1-3206-000CN Pickup_Assembly  - Paper cassette pick-up assembly - Includes 1 pick roller and 2 feed rollers
RM1-3533-000CN Pickup_Assembly  - 1 x 500-sheet input tray paper pick-up assembly
Q3938-67969 Maintenance_Kit  - ADF maintenance kit - Includes the ADF paper pick-up roller assembly and the separation pad assembly
Q3938-67944 Maintenance_Kit  - ADF maintenance kit - Includes the ADF paper pick-up roller assembly and the separation pad assembly
RM1-3345-000CN Pickup_Assembly  - Multi-purpose/tray 1 paper pick-up assembly
RM1-3357-000CN Cover  - Front cover assembly - Plastic cover that protects the front door assembly
FM2-0730-000CN Pressure_Assembly  - Pressure roller assembly - For the stapler/stacker and booklet-maker
Q3938-67964 Tray  - Duplex switchback tray
RM1-3569-000CN PC_Board  - 1 x 500-sheet input tray paper feed PCA assembly
RM1-4108-000CN Guide  - Swing guide assembly - Includes swing roller assembly, swing jam clearing label, swing press assembly, swing roller shaft assembly, and the paper delivery gate arm
RM1-3585-000CN PC_Board  - Memory tag PCA assembly
RC2-1278-000CN Cover  - Rear cover - Plastic cover that protects the rear part of the stapler/stacker unit
RM1-3222-020CN Lifter  - Lifter-drive-assembly
RM1-4172-000CN Guide  - Entrance upper guide assembly - For the stapler/stacker and booklet maker unit
4G3-0769-000CN Motor  - Ejection stack motor (M32) assembly
RM1-4130-000CN Delivery  - Saddle paper delivery assembly
FM2-0756-000CN Guide  - Saddle guide assembly - Mounts on the front saddle side plate - For the booklet maker
RC1-9871-000CN Cover  - 1 x 500-sheet paper input tray rear cover
RM1-4135-000CN Guide  - Lower height guide assembly
FM2-1409-000CN Motor  - Press motor (M36) assembly
4G1-2283-000CN Cable  - CABLE, SADDLE UNIT
RM1-4404-000CN Cover  - Internal front door cover assembly - Plastic cover located behind the front door assembly
RM1-4104-000CN Tray  - Stack tray assembly - Includes front and rear extension tray guide, stack tray, and extension tray
RM1-3683-000CN Cover  - Lower left side cover assembly - Located on the intermediate feed main body
RM1-3232-000CN Case  - Thermopile case assembly
4A3-1783-000CN Roller  - ROLLER, FOLDING
RL1-1477-000CN Cover  - Lower internal cover assembly - Internal cover for the saddle assembly - For the booklet maker unit only
CB459A Roller  - 2nd transfer roller assembly - For the laserjet CP6015 and CM6030/6040 series
RM1-3366-010CN Drive_Assembly  - Drive assembly - For use with multi-purpose/tray 1
RM1-4399-000CN Guide  - Rear guide reader assembly
RM1-4121-000CN Door  - Upper cover assembly - Top door located on the stapler/stacker assembly
RM1-3341-000CN Tray  - Multi-purpose/tray 1 drop down door paper input tray assembly
RM1-4519-000CN Motor  - Fuser DC motor (M11) assembly - Drives the fuser roller, the delivery roller, and the fuser pressure roller
Q3938-67959 Roller  - Paper pick-up roller - Includes one pick-up roller, and two paper feed rollers - Use with tray 2,3,4, and 5
RM1-3253-000CN Cage  - Formatter board cage assembly - Metal shield and enclosure for the formatter board
FM2-0737-000CN Motor  - Saddle motor assembly - Includes primary transfer roller disengagement motor(M9) and motor mount
RL1-1210-000CN Cover  - Rear cover - Plastic cover that protects the rear part of the printer
FG3-2887-000CN PC_Board  - Tray driver PCA assembly
RM1-4123-000CN Cover  - Inner cover assembly - Inner cover located on the left side of the finisher main body
RC2-1351-000CN Cover  - Lower internal cover (stapler/stacker only)
Q3931-67905 Cover  - Face down cover - Output paper cover on top of the printer - Holds the paper after it has been printed
RM1-4131-000CN Guide  - Upper delivery guide assembly - For the saddle assembly
RM1-3537-000CN Door  - 3 x 500-sheet paper input tray right door assembly
RC1-9336-000CN Cover  - Left cover assembly - Plastic cover that protects the left side of the printer
FG3-2892-000CN Cable  - CABLE, SOLENOID
RM1-4110-000CN Guide  - Lower entrance guide assembly - Located on the saddle paper feeder assembly
RC1-9872-000CN Cover  - 1 x 500-sheet paper input tray left cover
RC1-9351-000CN Cover  - Paper delivery cover
RM1-3247-020CN Gear  - Fuser one way gear assembly 
RM1-4129-000CN Cover  - Upper left cover assembly - Plastic cover that protects the upper left side of the booklet maker
RC1-9350-000CN Cover  - Upper front cover - Large rectangle shaped plastic cover located on left side on the top of the printer
RC1-9896-000CN Caster  - Double lock front caster - For the 1 x 500-sheet paper input tray
RC1-9921-000CN Door  - Stock door - For 1 x 500-sheet paper input tray
4G3-0725-000CN Guide  - Motor guide assembly - Located on the saddle assembly - For motor (M3)
Q3931-67920 Roller  - Paper pick-up retard roller - Used for tray 1
RM1-4397-000CN Hardware  - Right assist assembly
RM1-4396-000CN Hardware  - Left assist assembly
RM1-3235-000CN Plate  - Yellow partition plate assembly
RM1-3238-000CN Plate  - Cyan partition plate assembly
RC1-9874-000CN Cover  - 1 x 500-sheet paper input tray lower right cover
RM1-3233-000CN Cover  - Left side wall cover assembly
4H3-0370-000CN Clutch  - Electromagnetic shutter clutch (CL31) connector (J1046)
RM1-3564-000CN Cable  - Motor cable - For media feed stepping DC motor (M201)
RM1-3563-000CN Cable  - Motor cable - For media feed stepping DC motor (M202)
RL1-1272-000CN Arm  - Auxiliary arm - Mounts on the drive frame on the intermediate paper transfer unit (IPTU)
RC1-9666-000CN Cover  - Back cover - Located on top of the shield plate on the intermediante feed main body
RM1-3354-000CN Plate  - Rear mount cover plate assembly
RC1-9882-000CN Stopper  - STOPPER, RIGHT DOOR
RK2-1366-000CN Motor  - Toner feed motor (M17) - Drives the yellow, magenta, and cyan toner feed screws and waste toner feed screws - Mounts on the toner cartridge drive assembly
RM1-3237-000CN Plate  - Magenta partition plate assembly
RM1-3291-000CN Guide  - Multi-purpose/tray 1 guide assembly
RM1-3612-000CN Cable  - FIXING JOINT CABLE
4G3-0934-000CN Sensor  - Paper face sensor assembly
RU5-6035-000CN Guide  - Tray roller guide - Located on the output bin 1
RM1-0037-020CN Roller  - Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder
RC2-1283-000CN Panel  - Upper height panel - Located on the stapler/stacker unit
RC1-9695-000CN Plate  - Assist arm cap plate - Located on the upper guide assembly
Q7829-67903 Motor  - PCA motor assembly
RL1-1280-000CN Cover  - Right lower cover assembly
RM1-4107-000CN Sensor  - Area sensor flag assembly - Includes flag area sensor plate - Located on the finisher main body
RM1-3364-000CN Fan  - Exhaust fan assembly - Cools the fuser area
RM1-3538-000CN Door  - 1 x 500-sheet paper input tray right door assembly
RM1-3618-000CN Other_Parts  - REAR LOWER CABLE
RC1-9917-000CN Caster  - Stationary rear caster - Mounts on the bottom frame of the 500-sheet high capacity input (HCI) paper feeder assembly
4K1-1103-000CN Motor  - Stepping motor (M5) connector (J113)
4G3-1777-000CN Cable  - Staple connecting cable assembly
FL2-0821-000CN Solenoid  - Solenoid (SL34) - Buffer rear end holding solenoid drive signal
FM2-0763-000CN Sensor  - Rear end sensor assembly
FC5-5436-000CN Rail  - Rail rack - Mounts on the finisher main body - Four used
RL1-1311-000CN Rail  - Paper cassette tray left rail
Q7829-67909 Foam  - ADF reflector foam - White plastic sheet with foam that reflects the light wile scanning
RM1-3252-000CN Holder  - Main switch (SW11) holder assembly
RC1-8519-000CN Torque_Limiter  - Torque limiter - Located next to paper pick-up retard roller in multi-purpose/tray 1 assembly
RM1-3570-000CN Sensor  - Option paper sensor PCA assembly
XF2-1608-840CN Belt  - Timing belt - Located on the return roller assembly
RC1-9883-000CN Lever  - Lock lever - This is the rear cover lock for the 1 x 500-sheet paper input tray
RM1-3610-000CN Cable  - DC controller board power cable
RM1-3230-000CN Holder  - Transfer contact holder assembly
RC1-9900-000CN Support  - Lock shaft support - Located on the 1 x 500-sheet paper input tray
4G1-2285-000CN Cable  - Sensor cable - Located on the saddle tray assembly - Connects on the photo interrupter (TLP1242)
4S3-2117-000CN Spring  - Tension spring - Provides tension to the front pressure plate (big spring)
RM1-3340-000CN Tray  - Face down end tray assembly
RC2-1315-000CN Caster  - Caster - Used on pedestal assembly (universal)
RL1-1284-000CN Cover  - Top cover assembly - Protects the top part of the main printer chassis
FM2-0720-000CN Mount  - Flexible cable mount assembly
FM2-1708-000CN Sensor  - Option sensor assembly - Includes the photo interrupter (TLP1424) and bracket
RM1-4394-000CN Fan  - Chassis fan assembly - Located on the intermediate feed main body - Includes fan and plastic fan bracket (FM8)
RL1-1310-000CN Rail  - Right cassette rail - For the 1 x 500-sheet paper input tray
RC1-9873-000CN Cover  - 1 x 500-sheet paper input tray upper front cover
4G3-0210-000CN Lock  - Upper cover lock assembly
4S3-0171-000CN Gear  - 50-tooth gear - Located on the saddle assembly
FM2-1417-000CN Sensor  - Sensor/switch assembly - Includes leaf spring, micro switch (MSW31), photo interrupter (PI32), and wire saddle
RK2-1382-000CN Fan  - Delivery unit cooling fan (FM7)
RC2-1284-000CN Guide  - Side wall guide - Mounts on the upper height panel on the booklet maker unit
RM1-3682-000CN Gear  - Damper gear assembly - Includes 70-tooth gear and one way hinge - Located on the damper assembly
RC1-8526-000CN Guide  - Multi-purpose/tray 1 upper guide
RM1-3620-000CN Cable  - SCANNER JOINT CABLE
RM1-4398-000CN Guide  - Front guide reader assembly
RM1-4411-000CN Arm  - T2 guide arm assembly
Q7829-67917 ADF  - ADF float assembly
RM1-3617-000CN Other_Parts  - FRONT CABLE
RM1-3619-000CN Other_Parts  - REAR UPPER CABLE
XF2-3837-340CN Belt  - Timing belt - Belt that runs on the 30-tooth pulley on the saddle assembly
RC1-9206-000CN Rail  - Rear reverse scanner rail
RM1-3254-000CN Holder  - Cartridge contact holder assembly
Q3938-67952 Hinge  - ADF hinge assembly - For the top cover on the scanner (document lid)
RK2-2376-000CN Sensor  - SENSOR UNIT, HUMIDITY
RL1-1335-000CN Guide  - GUIDE, DUPLEXING FEED, UPPER
FM2-0710-000CN Switch  - Approach switch assembly - Includes approach switch plate and microswitch (MS33)
FM2-1423-000CN Shaft  - Swing press shaft assembly
FM2-0707-000CN Sensor  - Paper sensor assembly - Includes the paper sensor arm, photo interrupter (PI42), and paper sensor plate
FB3-7928-020CN Deflector  - Paper deflector (flapper 1) - Shaft with curved deflector fingers - Attaches to the front and rear saddle side plate
RC2-1347-000CN Cover  - Slide cover - Plastic cover that slide in to the upper height panel on the stapler/stacker unit
RL1-1283-000CN Guide  - Multi-purpose/tray 1 right guide assembly
RC1-9706-000CN Cover  - Right cover assist - Located on the lower guide assembly
RM1-3239-000CN Cover  - Right side wall cover assembly
RL1-1322-000CN Cover  - 1 x 500-sheet paper input tray right front cover
RC1-8959-000CN Guide  - GUIDE, FACE-DOWN INNER
RL1-1321-000CN Cover  - 3 x 500-sheet paper input tray right front cover
RC1-9511-000CN Cover  - COVER, MOTOR
RC1-9278-000CN Holder  - Fuser fan holder - Holds fan (FM2)
RC1-9344-000CN Cover  - Left rear cover - Plastic cover that protects the left rear part of the printer - Corner cover with slot for I/O connectors
RM1-3216-000CN Holder  - Intermediate transfer belt (ITB) gear holder assembly
FC5-3657-000CN Torque_Limiter  - Torque limiter - Torque limiter for the swing press shaft
RK2-1331-000CN Motor  - Stepping motor - Main drive motor for the printer - Motor M1
RM1-4415-000CN Cover  - Rear right cover assembly
FM2-1639-000CN Mount  - Delivery switch mount assembly
RM1-4392-000CN Roller  - Retard roller - Mounts on the multi-purpose roller assembly next to the limiter torque
FB5-2697-000CN Deflector  - Paper deflector (flapper 2) - Shaft with curved deflector fingers - Attaches to the front and rear saddle side plate
RM1-4128-000CN Mount  - Lattice cable mount assembly
RM1-4407-000CN Guide  - Paper delivery guide assembly
RM1-4409-000CN Cable  - Fuser bias cable assembly
4S3-1050-000CN Bearing  - Ball bearing (6902ZZNR)
RK2-1377-000CN Fan  - Cooling fan - Provides air to the print cartridge and imaging drum area
FM2-0709-000CN Holder  - Area sensor holder assembly
RC1-9705-000CN Cover  - Left cover assist - Located on the lower guide assembly
RC2-1280-000CN Cover  - Lower left cover - Mounts on the saddle tray assembly
Q3931-67925 Lock  - Security lock adapter kit
RK2-1378-000CN Fan  - Fuser cooling fan (FM2) - Provides air to the fuser area
4G3-0271-000CN Link  - Slide link assembly - Located on the top door assembly (upper cover)
4S3-2116-000CN Spring  - Tension spring - Provides tension to the front pressure plate (small spring)
4G1-1498-000CN Sensor  - Area sensor PCA assembly - Located on the area sensor holder assembly
RC1-9884-000CN Door  - 1 x 500-sheet paper input tray tape door
FG3-2903-000CN Cable  - CABLE, OPERATION TRAY
RK2-1356-000CN Cable  - Flexible flat cable - Connects to the formatter board through the (J9001) connector and to the DC controller PCA through (J123) connector
RM1-3561-000CN Cable  - Intermediate paper transfer unit (IPTU) drawer connector cable assembly - Located on the fin lock assembly
RC1-9881-000CN Guide  - 1 x 500-sheet input tray paper feed roller guide
RM1-3225-000CN Grip  - Front grip support assembly
RM1-3226-000CN Grip  - Rear grip support assembly
RM1-5950-000CN Cover  - Fuser fan cover assembly - Plastic cover located next to the rear cover assembly
FU5-0454-000CN Gear  - 40-tooth gear - Runs on the swing press shaft assembly - Located between torque limiter and bushing on the rear side plate of the finisher
RM1-4401-000CN Duct  - Intermediate transfer belt (ITB) duct assembly
RK2-1370-000CN Motor  - Toner feed motor (M16) - Drives the black toner feed screws and waste toner feed screws - Located on the toner cartridge drive assembly
FC5-4221-000CN Guide  - Tray roller guide - Mounts on the front side tray plate
RL1-1215-000CN Rail  - Right cassette rail - For the 1 x 500-sheet paper input tray
RC1-9276-000CN Duct  - Cartridge duct - Plastic duct that vents air from the fan (FM3) to the cartridge area
RC1-9912-000CN Shaft  - Lock shaft - For the 1 x 500-sheet paper input tray
RC1-9318-000CN Other_Parts  - GUIDE, CABLE, E
RC1-9277-000CN Holder  - Cartridge fan holder - Holds fan (FM3)
RM1-3391-000CN Cable  - FACE-DOWN UNIT 2 CABLE
RM1-4141-000CN PC_Board  - LED PCA assembly - Located on the stapler/stacker unit rear cover
RM1-4402-000CN Holder  - Tag PCA holder assembly
RM1-3599-000CN Cable  - MFP AC cable - Has connector J3005 on one side and J301 on the other
RC1-9309-000CN Duct  - Scanner fan duct - Directs air into scanner area
RL1-1213-000CN Rail  - Left top rail - For the 1 x 500-sheet paper input tray
4A3-1779-000CN Plate  - Rotation plate - Located next to the dowel pin on the saddle assembly
RM1-4391-000CN Flag  - Face down full flag assembly
RL1-1206-000CN Roller  - Pick-up roller - Located on the on the paper pick-up plate assembly
RM1-3571-000CN Cable  - Paper pick-up option drawer cable
RC1-9308-000CN Other_Parts  - GUIDE, CABLE, C
RM1-3623-000CN Cable  - INTERFACE JOINT CABLE
RC1-9607-000CN Guide  - Hold guide plate - Located on the left side of the lower guide assembly
RC1-9703-000CN Plate  - Rear mount cover plate assembly
FM2-1401-000CN Sensor  - Shutter sensor assembly
4G3-1624-000CN Sensor  - Paper face sensing assembly - Located on the upper height panel
RC1-9915-000CN Bushing  - Bushing - Mounts on the lock shaft next to the arm lock on the 1 x 500-sheet paper input tray
4A3-1955-000CN Plate  - Grounding plate - Used only for booklet maker series
WG8-5696-000CN Sensor  - Photo-interrupter sensor assembly (Does not include the sensor flag)
RM1-4400-000CN Guide  - Guide sensor assembly - For fuser open cover detection sensor (SR34)
FB3-7881-000CN Knob  - Knob - Mounts on the lower internal cover on the left side of the saddle assembly
RM1-3624-000CN Cable  - Color plane registration joint cable
FC5-6978-000CN Plate  - PLATE, OPTION TRAY, FRONT
RC1-8527-000CN Cover  - Multi-purpose/tray 1 blanking cover
RC1-9211-000CN Cover  - COVER, MAIN SWITCH
RM1-3560-000CN Cable  - Drawer cable - Locaten on the fin lock assembly in the intermediate feed main body
RC1-8961-000CN Duct  - Air duct - Deflects air from fan FM7
XF9-0748-000CN Belt  - Timing cogged belt - Located on the front side plate on the finisher main body
RC1-9043-000CN Other_Parts  - BAND, DOOR
RG5-1928-000CN Cable  - Registration cable assembly - Includes 7P and 3P connectors
RC1-9334-000CN Other_Parts  - DUCT, SCANNER
RK2-1354-000CN Cable  - Laser flexible flat cable - Connects the laser driver PCA through (J501B) connector and the DC controller PCA through (J127) connector
RM1-5953-000CN Cover  - Front internal small cover assembly - Located on the upper right side of the front door assembly
RM1-5030-000CN Cable  - CABLE, TP/T2 OPEN SENSOR
RC1-9649-000CN Cover  - Blanking cover - Located next to the four bushings on the drive frame
RM1-3573-000CN Cable  - Pick-up option PCA connect cable
RM1-3217-000CN Cable  - FIXING MOTOR CABLE
RM1-3622-000CN Cable  - PANEL JOINT CABLE
FC5-5004-000CN Sensor  - Paper sensing sensor flag - Mounts on the lower height panel
RC1-9307-000CN Other_Parts  - GUIDE, CABLE, B
RC1-8928-000CN Lever  - Paper sensing lever - Senses paper in intermediate transfer belt (ITB) duct assembly
FU5-0457-000CN Gear  - 17-tooth gear - Attaches to the rear tray side plate
RC2-1279-000CN Cover  - Connector tray cover - Mounts on the upper left side of the rear cover on the stapler/stacker unit
VS1-7257-012CN Connector  - Drawer Connector (J1903) - For the 1 x 500-sheet input tray
RC1-8511-000CN Retainer  - Retainer (C Type) for Color LaserJet CP6015n.
FU5-1169-000CN Bushing  - Bushing - Attaches to the rear tray side plate - Located next to the 26-tooth gear on the tray drive shaft assembly
FC5-5024-000CN Knob  - Latch knob - Mounts on the open/close guide on the saddle guide assembly
FS6-0829-000CN Gear  - 16/56-tooth gear - Runs on the folding roller next to the front adjustment arm
RC1-9190-000CN Plate  - PLATE, FAN FIXING, FRONT
RM1-3574-000CN Cable  - Option sensor PCA connect cable
FU5-9059-000CN Screw  - M3 X 6mm machine thread screw with attached washer - Used to secure metal to metal
RM1-3389-000CN Cable  - Control Panel cable
XF2-1607-860CN Belt  - Timing cogged belt - Runs on ejection stack motor assembly (M32)
Q7829-67914 Sensor  - ADF photo interrupter sensor with connector
FM2-0718-000CN Flag  - Entrance sensor flag assembly - Includes the entrance sensor lever and the entrance sensor arm damper
RC1-9186-000CN Guide  - Intermediate transfer belt (ITB) rear entrance guide
RC1-9332-000CN Guide  - Fuser cable guide - Located on the fuser power supply assembly
RC1-9306-000CN Other_Parts  - GUIDE, CABLE, A
FB3-7934-000CN Rack_Slide  - Rear rack slide - Mounts on the rear saddle side plate
FB3-7967-000CN Rack_Slide  - Front rack slide - Mounts on the front saddle side plate
RM1-3385-000CN Cable  - Toner feed motor (M16) cable
RC1-9246-000CN Plate  - Front sensor plate - For sensor (SR32)
RM1-3576-000CN Cable  - Pick-up option lifter unit cable
FU5-0435-000CN Gear  - 44-tooth gear - Mounts on the front tray side plate attached to the upper tray cross member
5851-2501 Cable  - Hard drive power SATA cable - Provides power to the hard drive connects to the mother board
RC1-9312-000CN Other_Parts  - GUIDE, CABLE, D
WC2-5512-000CN Switch  - Detection switch
FS5-3576-000CN Gear  - 30-tooth gear
4A3-1763-000CN Arm  - Front adjustment arm - Located on the folding roller on the saddle assembly
4A3-1764-000CN Arm  - Rear adjustment arm - Located on the folding roller on the saddle assembly
RC1-9688-000CN Guide  - Cable guide - Located next to the paper feed cogged belt on the intermediate feed main body
4A3-1782-000CN Stop  - Lever stopper
RU5-0790-000CN Gear  - 83/25-tooth gear - Mounts on the fuser motor plate
RC1-9913-000CN Arm  - Lock arm - For the 1 x 500-sheet paper input tray - Mounts on the lock shaft
FU5-2399-000CN Gear  - 29-tooth gear - Runs on the paper feeder motor assembly
FS5-3577-000CN Pulley  - 39-tooth pulley - Runs on the woodruff roller - Located next to the roller flag
RC1-9326-000CN Plate  - HVT-A (high-voltage transmission) guard plate
RC1-8931-000CN Rail  - RAIL, FIXING, FRONT
RC2-1356-000CN Ground  - Grounding plate - Located on the rear left side of the saddle assembly
RC1-9360-000CN Cover  - COVER, FACE-DOWN DRIVE
RC1-9256-000CN Tray  - Screw tray - Attaches next ot the cable guide E
FU5-3086-000CN Pulley  - 20-tooth pulley
FS6-0830-000CN Gear  - 16-tooth gear - Runs on the folding roller next to the front adjustment arm
RC2-1734-000CN LED  - LED window - Mounts on the upper left side on the rear cover assembly of the stapler/stacker unit
RM1-3630-000CN Cable  - Multi-purpose/tray 1 cable
RU5-0868-000CN Gear  - 22-tooth gear - Small gear that runs on the paper-feed cogged belt
FS6-0822-000CN Gear  - 16/33-tooth gear - Runs on the shaft located under the folding roller
RM1-3383-000CN Cable  - Toner feed motor (M17) cable
RC1-9324-000CN Holder  - Environment sensor holder - Holds the humidity sensor unit
RC1-9300-000CN Other_Parts  - BUTTON, MAIN SWITCH
RC1-9235-000CN Plate  - PLATE, DRAWER GUARD
RC1-9220-000CN Lever  - LEVER, DOOR INTERLOCK SHUTTER
XD9-0234-000CN Clip  - E-Type retainer ring
FB3-7980-000CN Spring  - Torsion spring - Provides torsion to flag sensor located on the rear saddle side plate
FU5-0428-000CN Gear  - 30-tooth gear - Runs on the timing belt on the finisher lower roller next to the 20-tooth pulley
FS6-0815-000CN Gear  - 32-tooth gear/16-tooth pulley - Located on the drive support in front of the motor (M5)
FS6-0823-000CN Gear  - 16-tooth gear - Runs on the shaft located under the folding roller
FS6-2582-000CN Spring  - Tension spring - Provides tension to the pressure plate assembly
FC5-5542-000CN Guide  - Entrance sheet guide - Mounts on the cross member entrance guide
FB3-7973-000CN Holder  - Roller holder 2 - For the cam shaft
FB3-7925-030CN Flag  - Roller flag - Mounts next to the 39-tooth pulley on the saddle assembly
RM1-3575-000CN Cable  - Paper pick-up option cable - Used for the 1 x 500-sheet input tray
XA9-1495-000CN Screw  - Wafer head machine screw - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal
FC5-5021-000CN Latch  - Right latch claw
RC1-9901-000CN Plate  - Switch cover plate - For the 1 x 500-sheet paper input tray door open detection switch (SW103)
RC1-8939-000CN Rail  - RAIL, FIXING, REAR
RC1-9208-000CN Foot  - Chassis rubber foot
XA9-1500-000CN Screw  - M3 pan-head Phillips screw with flat washer - 8mm long
XD2-3100-152CN Ring  - C-type external retainer ring
XD3-2300-142CN Pin  - Dowel pin - Located next to the 17-tooth gear on the output bin 2
XD3-2300-202CN Pin  - Dowel pin - Locate next to the 50-tooth gear
XA9-1386-000CN Screw  - M3 X 8mm long self threading screw with captured washer
XA9-1422-000CN Screw  - M4 X 12mm machine screw with washer
XA9-1448-000CN Screw  - Screw - M4 X 8mm long
XA9-1449-000CN Screw  - M3 pan-head Phillips screw with machine threads - 8mm long
XA9-1469-000CN Hardware  - Machine screw with attached washer - M3, 10mm - Used to hold plastic to metal
RM1-3572-000CN Cable  - Pick-up option door switch cable
RC1-9328-000CN Holder  - High voltage connector holder - Located on the left side of the printer chassis - Attaches behind the main switch cover
RC1-9231-000CN Rail  - ROLLER, RAIL
RC1-9233-000CN Other_Parts  - SPRING, LEAF
RC1-9244-000CN Spring  - Torsion spring - Provides torsion to the front fuser fan plate
FB5-5937-020CN Flag  - Flag sensor - Located next to the ball bearing (6902ZZNR) - Mounts on the rear saddle side plate
FB3-7979-000CN Flag  - Flag sensor - Located on the rear saddle side plate
FC5-5005-000CN Spring  - Torsion spring - Provides torsion to the paper sensing sensor flag located on the lower height panel
FS6-0814-000CN Gear  - 16-tooth gear/32-tooth pulley - Located on the rear part of the lower pass guide next to the 32-tooth gear/16-tooth pulley
4A3-4715-000CN Plate  - Stop hinge plate - Used only for booklet maker series
RC1-9687-000CN Hardware  - Blanking sheet - Mounts on the shield plate
RC1-9620-000CN Pulley  - Flange pulley - Attaches to the paper feed cogged belt located on the intermediate feed main body assembly
RC1-4585-000CN Bushing  - Bushing - Located on the side cover assembly (four needed)
XD9-0240-000CN Other_Parts  - PIN, DOWEL
RM1-5029-000CN Cable  - CABLE, FIXING OPEN SENSOR
XB4-7401-005CN Screw  - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
XB4-7401-006CN Screw  - M4x10 tapping pan-head screw
XB6-7303-005CN Screw  - Machine screw - M3, 30mm long with self-tapping threads - Typically used to hold metal to plastic
XA9-1504-000CN Screw  - M3 truss head (flanged) screw - 8mm long
XA9-1801-000CN Screw  - M13x12 RS screw - Used to secure metal to metal
XB1-2300-407CN Screw  - M3x4 machined truss-head screw
WT2-5694-000CN Clamp  - Snap-in cable clamp
WT2-5738-000CN Holder  - Cable holder - Secures cable at left front side near DC controller board - White plastic stand-off/holder
XA9-0912-000CN Screw  - Machine screw with captured washer - M5 X 12 - Typically used to secure plastic parts to metal
RU5-0791-000CN Gear  - 34-tooth gear - Mounts on the fuser motor plate
RU5-2796-000CN Spring  - Tension spring - Provides tension to the paper sensing lever
RU5-2822-000CN Spring  - Tension spring - Provides tension to the scanner assembly
VS1-7177-003CN Clip  - Retaining clip - This is a retaining clip for fuser thermistor power cable
RL1-1216-000CN Plate  - Fuser motor (M11) plate
RS5-9099-000CN Screw  - Stepped screw - Larger shoulder screw used to fasten the left side cover to the frame of the 2,000-sheet paper feeder assembly (two used)
XG9-0586-000CN Bearing  - Ball bearing - Located on the fixing one way gear assembly
U2014E Care_Pack  - HP Network Install high-end LaserJet Multifunction printer Service
XB2-8300-607CN Screw  - M3x6 screw with washer
UJ165E Care_Pack  - HP 3 year Next business day Onsite Color LaserJet CM6030/40MFP Hardware Support
UJ166E Care_Pack  - HP 4 year Next business day Onsite Color LaserJet CM6030/40MFP Hardware Support
UJ167E Care_Pack  - HP 5 year Next business day Onsite Color LaserJet CM6030/40MFP Hardware Support
UJ168E Care_Pack  - HP 3 year 4 hour response 9x5 OnsiteColor LaserJet CM6030/40MFP Hardware Support
UJ169E Care_Pack  - HP 3 year 4 hour response 13x5 OnsiteColor LaserJet CM6030/40MFP Hardware Support
UJ170E Care_Pack  - HP 4 year 4 hour response 9x5 OnsiteColor LaserJet CM6030/40MFP Hardware Support
UJ171E Care_Pack  - HP 4 year 4 hour response 13x5 OnsiteColor LaserJet CM6030/40MFP Hardware Support
UJ172E Care_Pack  - HP 5 year 4 hour response 9x5 OnsiteColor LaserJet CM6030/40MFP Hardware Support
UJ173E Care_Pack  - HP 5 year 4 hour response 13x5 OnsiteColor LaserJet CM6030/40MFP Hardware Support
UJ174PE Care_Pack  - HP 1 year Post Warranty Next business day Onsite Clr LaserJet CM6030/40MFP Hardware Support
UJ175PE Care_Pack  - HP 1 year Post Warranty 4 hour response 9x5 OnsiteColor LaserJet CM6030/CM6040MFP Hardware Support
UJ176PE Care_Pack  - HP 1 year Post Warranty 4 hour response 13x5 OnsiteColor LaserJet CM6030/40MFP Hardware Support
UJ189E Care_Pack  - HP MKRepl Color LaserJet CM6030/40MFP and CP6015 Color printer fuser 110V Service
UJ191E Care_Pack  - HP Maintenance Kit Replacement Color LaserJet CM6030/40MFP ADF Service
UJ192E Care_Pack  - HP MK Repl Clr LaserJet CM6030/40MFP and CP6015 Color printer TransferKit Service
UJ573E Care_Pack  - HP MK Replacement Color LaserJet CM6030/40MFP and CP6015 Color Roller Kit Service
UL411E Care_Pack  - HP 3 year Next business day Onsite Defective media retention CLJ CM6040/6030MFP Support
UL412PE Care_Pack  - HP 1 year PW Next business day Onsite Defective media retention CLJ CM6040/6030MFP Support
UL624E Care_Pack  - HP Secure Hard Disk Installation and Startup Service
RM1-3640-000CN Cable  - Waste toner sensor cable
Q3938-67971 Drive_Assembly  - Hard drive - High performance EIO serial ATA hard drive
UT829PE Care_Pack  - HP 2 year Post-Warranty Next business day onsite Color LaserJet CM6030 6040MFP Hardware Support
UT980E Care_Pack  - HP 4year Next business day Onsite + Defective Media Retention Color LaserJet CM6040/6030 MFP Support
UU861E Care_Pack  - HP 5year Next business day Onsite + Defective Media Retention Color LaserJet CM6040/6030 MFP Support
UU927PE Care_Pack  - HP 1 year Post Warranty Phone Assist High-end Multifunction LaserJet printer Service
0950-4768 Hard_Drive  - 80GB SATA hard drive - 7,200 RPM, 3.5-inch form factor, 26.1mm height
Q3938-67903 Pin  - Large pin assembly
Q3938-67904 Pin  - Small pin assembly
Q3938-67906 Glass  - Scanner glass assembly - Glass plate on which the documents are placed to be scanned - Mounts in the scanner bezel
Q3938-67907 Sensor  - Scanner lid sensor assembly
Q3938-67908 Motor  - Scanner motor - Drives the optical carriage assembly
Q3938-67909 Pulley  - Scanner pulley assembly - For transmission timing belt
Q3938-60103 PC_Board  - ASSY-FACEPLATE FORMATTER
Q3938-60107 Overlay  - Control panel overlay - Snaps on top of the control panel assembly (English)
Q3938-67953 Diverter  - ADF diverter assembly - Diverts paper to duplexer assembly, face up tray or face down delivery assembly
Q3938-67954 Cover  - Roller cover - Plastic cover that protects the ADF pick-up roller
Q3938-67955 Tray  - 500-sheet paper input tray cassette - For use with tray 2
Q3938-67956 Tray  - 500-sheet paper input tray - For use with tray 3, 4, or 5
Q3938-67957 Cover  - Face down cover - Output paper cover on top of the printer - Holds the paper after it has been printed
Q3938-67945 Cover  - ADF rear end cover assembly - End cover (cap)
Q3938-67946 Cover  - ADF front end cover assembly - End cover (cap)
Q3938-67947 Other_Parts  - HOLDER, SCANNER THERMISTOR
Q3938-67948 Cable  - ADF cable assembly - Interconnects the ADF assembly to the flatbed scanner assembly
Q3938-67949 Pad  - ADF separation pad assembly - Helps separate paper in the ADF
Q3938-67950 Tray  - ADF input paper tray assembly - Holds 50-sheets
Q3938-67951 Flag  - ADF paper sensor flag
Q3938-67911 Rod  - Scanner rod - Shaft that the scanner carriage assembly rides on
Q3938-67912 Cable  - Flat cable, 28, 940, A
Q3938-67913 Cable  - Flat cable, 28, 970, B
Q3938-67914 Roller  - ROLLER, PAPER PICK-UP
Q3938-67915 Guide  - Rubber guide - For the scanner glass
Q3938-67917 Other_Parts  - DAMPER, GEAR
Q3938-67918 Other_Parts  - LEVER, PAPER SENSING
Q3938-67919 Other_Parts  - RAIL, FIXING, FRONT
Q3938-67920 Cover  - Upper cover - Plastic cover that protects the upper left side of the ADF unit
Q3938-67921 Cover  - ADF lower cover - Plastic cover that protects the lower left part of the ADF unit
Q3938-67922 Cover  - Upper cover - Plastic cover that protects the upper right side of the ADF unit
Q3938-67923 Cover  - ADF lower cover - Plastic cover that protects the lower right part of the ADF unit
Q3938-67924 Cover  - ADF top cover - Plastic cover that protects the top part of the ADF unit
Q3938-67925 Cover  - ADF rear cover - Plastic cover that protects the rear part of the ADF unit
Q3938-67926 Cover  - Front cover - Plastic L-shaped cover were control panel snaps on
Q3938-67927 Cover  - Plastic screw covers with an adhesive back - Covers screw heads that secure the plastic scanner top cover
Q3938-67928 Hardware  - Power supply harness
Q3938-67935 Belt  - Transmission timing belt - Maintain constant speed during power transmission - Located on the trasmission assembly
Q3938-67936 Other_Parts  - RAIL, REVERSE, REAR
Q3938-67937 Fan  - Cooling fan - Fan that cools the scanner controller board (SCB) area
Q3938-67938 Fan  - Cooling fan - Fan that cools scanner area
Q3938-67939 Fan  - Cooling fan - Fan that cools the control panel area
Q3938-67940 PC_Board  - Copy processor board (CPB)
Q3938-67941 PC_Board  - SCUID board - Located on the havic assembly
Q3938-67942 Cable  - PCIe Cable - Connects to the SCUID board on havic assembly
Q3938-67943 ADF  - Automatic document feeder (ADF) whole unit assembly
RC1-8567-000CN Roller  - Multi-purpose paper pick-up roller
Q3931-67906 Filter  - Air filter kit
Q3938-67970 Cover  - ADF jam access cover - Located on the left top side of the printer - To remove paper jam from the ADF
0515-4679 Screw  - M3 pan-head phillips screw with washer - 6mm long
3030-1103 Screw  - Screw socket head cap (black) 6,32mm 0.25 inch long
RM1-5949-000CN Tray  - Lower duplexing tray assembly - Attaches to the paper delivery cover
RM1-4122-000CN Door  - Front door assembly
RM1-4134-000CN Door  - Front door assembly - For the stapler/stacker unit
RM1-4113-000CN Tray  - Booklet-output bin (saddle tray assembly) - Includes sensor cable and photo interrupter (TLP1242)
RM1-4115-000CN Tray  - Top output bin tray - Sstack sub-tray assembly for the stapler/stacker unit
Q3938-67905 Inverter  - Inverter assembly
Q6998-67901 Door  - Front door assembly - For the stapler/stacker unit
Q6998-67902 Tray  - Top output bin tray - Stack sub-tray assembly for the stapler/stacker unit
Q6999-67901 Door  - Front door assembly - For the booklet maker unit
Q7542-60003 PC_Board  - Formatter (main logic) board - For HP Color Laserjet CM6040 series
RL1-1289-000CN Roller  - Paper pick-up roller - For the 1 x 500-sheet and 3 x 500-sheet paper input tray
CC516A Other_Parts  - HP CLJ CM6040 Booklet Maker
CC517A Stacker_Assembly  - HP CLJ CM6040 Stapler/Stacker 
Q7829-67924 Roller  - Pickup roller high capacity input (HCI) - Attached to the pickup arm - Presses down the paper stack surface to feed the paper one sheet at a time (white)
RC1-8925-000CN Gear  - DAMPER, GEAR
RM1-3319-000CN Roller  - 2nd transfer roller assembly

Fusing Assembly Heater Assembly HP Fuser Kits Printer Fuser Unit HP Repair Kit HP Transfer Kit