HP LaserJet 4300 Parts
HP LaserJet 4300 Parts
Share
From
http://www.printerparts-hp.com
publisher
Jacky
Issue Time
2012-08-30
Part
Description
Q2431A
LaserJet - HP LaserJet 4300 Printer
C9121-67901
Memory - 128MB, 100-pin SDRAM DIMM memory module
Q7709-67951
Memory - 133 MHz 128MB, 100-pin SDRAM DIMM memory module Synchronous DRAM DIMM
Q2444A
Feeder - 1500 sheet paper tray and feeder assembly for LaserJet products series printers.
Q2431-69015
Power_Supply - Power supply assembly - 110V
RM1-0107-110CN
Power_Supply - Power supply assembly - 110VAC
RM1-0108-130CN
Power_Supply - Power supply assembly - 220V
Q2436-69007
Maintenance_Kit - LaserJet 4300 maintenance kit - (120V) - Includes refurbished Fuser Assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions
Q2436-67903
Maintenance_Kit - Maintenance kit - For 120 VAC - Includes Fuser Assembly, separation roller, transfer roller, feed roller for tray 1, two feed rollers for 500-sheet tray, one feed roller for 1500-sheet tray and installation instructions
Q2436-69006
Maintenance_Kit - LaserJet 4300 maintenance kit - (120V) - Includes refurbished Fuser Assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions
Q2437-67905
Maintenance_Kit - LJ 4300 maintenance kit - (220V) - Includes Fuser Assembly, separation roller, tr
C9651-69001
PC_Board - Formatter board assembly
C9651-67901
PC_Board - Formatter board assembly
Q2431-69019
Fuser_Assembly - Refurbished fuser assembly for LaserJet 4300 series - Bonds toner to paper with heat - For 220 to 240VAC operation
Q2431-69017
Fuser_Assembly - Fuser assembly for LaserJet 4300 series - Bonds toner to paper with heat - For 220 to 240VAC operation
RM1-0102-300CN
Fuser_Assembly - Fuser assembly for LaserJet 4300 series - Bonds toner to paper with heat - For 220 to 240VAC operation
Q2437-69007
Maintenance_Kit - LaserJet 4300 maintenance kit - (220V) - Includes refurbished Fuser Assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions
Q2437-69005
Maintenance_Kit - LaserJet 4300 maintenance kit - (220V) - Includes refurbished Fuser Assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions
Q2437-67907
Maintenance_Kit - LaserJet 4300 maintenance kit - (220V) - Includes Fuser Assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions
Q2436-67907
Maintenance_Kit - LaserJet 4300 maintenance kit - (120V) - Includes refurbished Fuser Assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions
RM1-0101-300CN
Fuser_Assembly - Fuser assembly for LaserJet 4300 series - Bonds toner to paper with heat - For 100 to 127VAC operation
Q2439-69002
Duplexer - Automatic duplexer assembly - For LaserJet 4200/4250 and 4300/4350 series printers
Q2439-67902
Duplexer - Automatic duplexer assembly - For LaserJet 4200/4250 and 4300/4350 series printers
Q2431-69018
Fuser_Assembly - Refurbished fuser assembly for LaserJet 4300 series - Bonds toner to paper with heat - For 100 to 127VAC operation
Q2431-69016
Fuser_Assembly - Fuser assembly for LaserJet 4300 series - Bonds toner to paper with heat - For 100 to 127VAC operation
RM1-0113-000CN
Laser_Scanner - Laser/scanner assembly
Q2439B
Duplexer - Automatic duplexer assembly - For LaserJet 4200/4250 and 4300/4350 series printers
Q2440-67903
Feeder - 500-sheet paper feeder and tray/cassette - This is the assembly frame and tray that the printer sits on top of
Q2439-69003
Duplexer - Automatic duplexer assembly - For LaserJet 4200/4250 and 4300/4350 series printers
Q2431-69001
Laser_Scanner - Laser/scanner assembly
RM1-0183-000CN
Laser_Scanner - Laser/scanner assembly for hewlett packard laserjet printers.
Q2439A
Duplexer - Duplexer assembly for LaserJet 4200/4300
RM1-0114-030CN
Cover - Cartridge access door cover for LaserJet 4250/4350 family
Q1339A
Cartridge - HP Monochrome LaserJet 4300 Print Cartridge
RG1-4276-030CN
Drive_Assembly - Control panel assembly
RM1-1195-000CN
Control_Panel - Control panel assembly
6R935
Cartridge - 39A YIELD BLACK TONER
RG1-4276-020CN
Control_Panel - Control panel assembly
Q7709A
Memory - 133 MHz 128MB, 100-pin SDRAM DIMM memory module Synchronous DRAM DIMM
RM1-0273-070CN
Cover - Front cover (or door) - Provides access to load paper in the 1,500 sheet paper feeder assembly
RM1-0287-040CN
Drive_Assembly - Lifter driver assembly - Includes the three drive gears, swing arm, tension spring and door open sensor
RM1-0287-020CN
Drive_Assembly - Lifter driver assembly - Includes the three drive gears, swing arm, tension spring and door open sensor
RM1-1088-090CN
Tray - 500-sheet tray/cassette - This is only the tray, does not include feeder or frame that tray goes into.
RM1-1088-050CN
Tray - 500-sheet tray/cassette - This is only the tray, does not include feeder or frame that tray goes int
RM1-1088-000CN
Tray - 500-sheet tray/cassette - This is only the tray, does not include feeder or frame that tray goes into
RM1-1088-070CN
Tray - 500-sheet tray/cassette - This is only the tray, does not include feeder or frame that tray goes into
RM1-0012-020CN
Roller - Paper feed roller assembly
5851-4076
Feeder - Kit - Paper Feed Assy. Includes Flag paper feed sensor, spring torsion, and roller paper feed assembly.
RM1-0283-080CN
Drive_Assembly - Paper pickup drive assembly - Includes the drive gears and solenoid mounted on a bracket assembly
RM1-0007-100CN
Transfer_Assembly - Paper transfer assembly
RM1-0001-040CN
Drive_Assembly - Main drive assembly - Main gear assembly on right side of printer
RM1-0004-110CN
Tray - Tray 1 paper input assembly
RM1-0034-070CN
Pickup_Assembly - Paper pickup assembly - Paper pickup drive assembly for Tray 1/Multipurpose input tray
RM1-0007-190CN
Transfer_Assembly - Paper transfer assembly
RM1-0004-060CN
Tray - Tray 1 paper input assembly
RK2-0278-000CN
Fan - Cooling fan on left side of printer - FN101
RM1-1098-030CN
Roller - Registration roller assembly
RM1-0011-000CN
Registration - REGISTRATION ASSEMBLY UNIT
RH7-1576-000CN
Motor - Toner cartridge motor - Motor M102
RM1-1098-000CN
Roller - Registration roller assembly
RM1-0033-020CN
Lifter - Tray 2 lifter drive assembly - Provides lift support for paper tray
RM1-0033-040CN
Lifter - Tray 2 lifter drive assembly - Provides lift support for paper tray
RH7-1576-020CN
Motor - Toner cartridge motor - Motor M102
RK2-0280-000CN
Fan - Cooling fan on right side of printer - Print cartridge fan - FN103
RH7-5358-000CN
Clutch - Paper feed assembly clutch - Electro mechanical clutch with 30 tooth white gear - CL 101
RM1-0002-030CN
Gear - Duplexing pendulum assembly - Gear assembly that transfers power from main motor to run duplexing capability
Q2431-90916
Manual - LaserJet 4200/4300 combined product family service manual
RM1-0208-000CN
Lifter - Tray lifter drive assembly - Lifts paper tray as paper is used in 500 sheet tray
RG1-4237-030CN
PC_Board - DC controller board - DC Controller for LaserJet 4300 series
RM1-0049-020CN
Cover - Top cover assembly - Top paper output tray and top of printer
5851-1891
Manual - LaserJet quick reference service guide (monochrome) - Volume IV
RM1-0049-030CN
Cover - Top cover assembly - Top paper output tray and top of printer
RH7-1570-000CN
Motor - Main motor - Motor on front right side of printer - M101
RM1-0026-040CN
Roller - Paper delivery assembly - Paper output roller assembly
RM1-0026-000CN
Delivery - Paper delivery assembly
RM1-0026-020CN
Delivery - PAPER DELIVERY ASSY.
RG1-4200-000CN
PC_Board - Paper feeder assembly PC Board - PC Board on right side of 500 sheet paper feeder assembly
RM1-0056-040CN
Drive_Assembly - Paper pickup drive assembly - Gear assembly on right front side of 500 sheet paper feeder assembly
RG1-4238-000CN
PC_Board - Feeder control PC board
RM1-0056-070CN
Drive_Assembly - Paper pickup drive assembly - Gear assembly on right front side of 500 sheet paper feeder assembly
RC1-0061-000CN
Spring - Torsion spring
8120-8381
Power_Cord - Power cord (Flint Gray) - 18 AWG, 1.8m (6.0ft) long - Has 90 degree (F) C13 receptacle (For 120VAC in the United States, Canada, Latin America, Korea, Taiwan, and Thailand)
RC1-0661-000CN
Cover - Right side cover assembly - For the 1,500 sheet paper feeder assembly
RM1-0285-000CN
Sensor - Paper sensor assembly - Includes the support tray with the paper stack surface and paper detection sensors, associated sensor flags, and cable assembly
RM1-0025-040CN
Feeder - Paper feed belt assembly
RM1-0002-020CN
Gear - Duplexing pendulum assembly - Gear assembly that transfers power from main motor to run duplexing capability
RM1-0699-000CN
Roller - Transfer roller assembly - Long black spongy roller - Transfers charge to paper
RM1-0699-020CN
Roller - Transfer roller assembly - Long black spongy roller - Transfers charge to paper
RM1-0037-020CN
Roller - Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder
RM1-0037-000CN
Roller - Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder
RC1-0287-030CN
Cover - Left side cover panel
RH7-1577-000CN
Fan - Cooling fan on right side of printer
RM1-0025-000CN
Roller - Replacement for part RM1-0025-000CN ORDER RM1-0025-020CN PAPER FEED BELT ASSY
RM1-0025-020CN
Roller - PAPER FEED BELT ASSEMBLY
RM1-0005-020CN
Tray - Drop down Tray 1 - Includes adjustable paper width guide assembly
C2950A
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
RM1-0046-020CN
Cover - Right side cover assembly
RC1-0662-000CN
Cover - Left side cover assembly - For the 1,500 sheet paper feeder assembly
RC1-0663-000CN
Cover - Rear cover assembly - Box type cover for the rear of the 1,500 sheet paper feeder assembly
RC1-0335-000CN
Torque_Limiter - Torque limiter - Torque limiter for 500 sheet paper feeder pickup roller
Q2431-67908
Label - LaserJet 4300 series name plate kit - Includes all model labels for LaserJet 4300 series and one HP jewel label used on drop down Tray 1
RC1-0488-020CN
Cover - Right side cover for 500 sheet paper feeder assembly
RG1-4231-020CN
Cable - Fuser cable - Main fuser cable for LaserJet 4300 series
WG8-5362-000CN
Shaft - Photo-sensor (TLP1241) - Sensor flag activated.
WG8-5624-000CN
Sensor - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated
RM1-1237-000CN
Connector - Cable and connector on bottom right rear of 500 sheet feeder assembly
RM1-0027-020CN
Cover - Rear output tray assembly - Includes upper rear paper output tray and cover
RM1-1236-000CN
Connector - Cable and connector on top right rear of 500 sheet feeder assembly
RK2-0269-000CN
Solenoid - Paper pickup solenoid
RM1-0294-000CN
Sensor - Paper size sensor assembly - Includes the three size fingers, micro-switch assembly and housing assembly
RG5-6826-040CN
Cable - DC Controller to fuser safety circuit, high voltage power supply (HVPS), electrostatic transfer belt (ETB)
RK2-0359-000CN
Thermistor - Environment temperature detection thermistor - Detects ambient air temperature to determine length of time for fuser warm up.
5063-1256
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
RH7-5355-000CN
Solenoid - Paper pick-up solenoid
RG5-6815-000CN
Cable - AC cable - Low voltage power supply (LVPS) to fuser power supply cable
5063-1257
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
8120-6805
Power_Cord - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has 90 degree receptacle (for 120V in the USA, Canada, Mexico, Philippines, and Taiwan)
RM1-0050-000CN
Cover - Front cover - Drop down Tray 1
RC1-0274-020CN
Guide - Paper feed belt guide for right side
RM1-0050-050CN
Cover - Front cover - Drop down Tray 1
RG1-4231-000CN
Cable - Fuser cable - Main fuser cable for LaserJet 4300 series
RC1-0291-000CN
Cover - Duplexer slot cover - Removable lower rear cover for Duplexer attachment slot
RM1-0036-020CN
Roller - Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24-tooth white gear on one side
RG1-4221-000CN
Cable - Tray 2 paper pickup sensor cable assembly - Connects to sensors PS101 and PS107
RM1-0036-000CN
Roller - Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24 tooth white gear on one side. Paper pickup roller - For Tray 2, 3 or 4 paper cassette
RM1-0286-020CN
Gear - Paper level sensor gear assembly
XD9-0137-000CN
Clip - E-Type retainer ring
RM1-0286-000CN
Gear - Paper level sensor gear assembly
VS1-6175-006CN
Connector - 6-pin connector and housing assembly
RG5-6826-000CN
Cable - DC Controller to fuser safety circuit, high voltage power supply (HVPS), electrostatic transfer belt (ETB)
RG1-4219-000CN
Cable - Memory cable - From DC Controller board to the toner cartridge wireless memory contact tag
RG1-4201-000CN
Connector - Cable and connector on top right rear of 500 sheet feeder assembly
RG1-4202-000CN
Connector - Cable and connector on bottom right rear of 500 sheet feeder assembly
RG1-4250-020CN
Cable - Sensor cable assembly - For 500 sheet feeder assembly
XA9-1263-000CN
Screw - M3X5 Phillips washer-head machine screw with a broad, flat washer attached to the screw head - Used to fasten sheet metal parts together
RC1-0209-000CN
Flag - Paper sensor flag for Tray 2 paper pickup assembly
RC1-0344-000CN
Cover - Fan connector cover - Small metal piece under fan that protects the fan connector
RG1-4223-000CN
Cable - Power cable for Tray 3 paper feeder - Black connector with 42mm six wire cable to white connector
RG1-4224-000CN
Cable - Envelope feeder cable - From DC Controller board to envelope feeder connector - Includes envelope feeder connector
RG1-4214-000CN
Cable - Top bin full sensor cable
RG1-4215-000CN
Cable - Control panel cable
RC1-0210-020CN
Shaft - Feeder roller shaft - Axel for Tray 2 feed roller
Q2431-40004
Overlay - Control Panel Overlay - English
RC1-0060-030CN
Flag - Paper feed sensor flag for Tray 1
RG1-4250-000CN
Cable - Sensor cable assembly - For 500 sheet feeder assembly
RM1-1189-000CN
Cable - Top bin full sensor cable
RC1-0289-000CN
Cover - Top rear cover of printer - Removes for Stapler/Stacker installation
RH7-5357-000CN
Solenoid - Tray 1 solenoid - Engages Tray 1 pickup roller
RK2-0360-000CN
Thermistor - Environment temperature detection thermistor - Detects ambient air temperature to determine length of time for fuser warm up.
Q2431-40009
Overlay - Control Panel Overlay (Spanish)
C2951A
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
RC1-0070-000CN
Roller - Pressure roller - Roller in Fuser Assembly that provides pressure for media against the fusing roller
RC1-0340-000CN
Guide - Guide for scanner cable 1
RH7-1573-000CN
Fan - Cooling fan on left side of printer
RM1-0103-020CN
Roller - Fixing film assembly - Includes heating element, heating element housing tube and fuser film sleeve - 110 volt
RM1-0054-000CN
Shutter - Right side shutter assembly - Blocks light from scanner on right side
RM1-1193-000CN
Cable - Envelope feeder cable - From DC Controller board to envelope feeder connector - Includes envelope feeder connector
RC1-0487-020CN
Cover - Left side cover for 500 sheet paper feeder assembly
RM1-1192-000CN
Cable - Power cable for Tray 3 paper feeder - Black connector with 42mm six wire cable to white connector
RC1-0288-000CN
Cover - Formatter board cover
RM1-0041-020CN
Sensor - Tray 2 paper size tray sensing assembly - White plastic tray size sensing fingers and microswitch assembly
RC1-0019-000CN
Cover - Inner right front cover
RK2-0349-000CN
Clutch - Paper feed assembly clutch - Electro mechanical clutch that connects to the white 30 tooth gear - CL 101
RM1-1191-000CN
Cable - Memory cable - From DC Controller board to the toner cartridge wireless memory contact tag
RK2-0276-000CN
Solenoid - Tray 1 solenoid - Engages Tray 1 pickup roller
RM1-0042-000CN
Connector - Accessory cable/connector - Connector for stacker and stacker/stapler accessory at top right rear of printer
RC1-0210-000CN
Shaft - Feeder roller shaft - Axel for Tray 2 feed roller
RM1-1190-000CN
Cable - Control panel cable
RC1-0320-000CN
Cover - Envelope cover - Plastic piece above Tray 1 pickup roller
VS1-7500-006CN
Connector - Connector (6-point)
5090-3379
Cleaner - Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills
RC1-2411-000CN
Guide - Alignment guide rib - Duplexer skew countermeasure
WC4-5139-000CN
Switch - Top cover interlock access switch
RL1-0019-000CN
Roller - Tray 1 pickup roller - D shaped roller under envelope cover
RC1-0269-020CN
Guide - DC Controller flat cable guide
RC1-0003-000CN
Arm - Toner cartridge arm - Mechanical link between main drive assembly and toner cartridge release mechanism
XD9-0234-000CN
Clip - E-Type retainer ring
RC1-0208-030CN
Holder - Paper sensor flag holder
RU5-0050-000CN
Gear - 30 tooth gear - Black plastic gear that attaches to paper feed assembly clutch
RC1-0273-000CN
Guide - Paper feed belt guide for left side
RC1-0268-000CN
Rod - Metal rod between external power button and switch on power supply board
RC1-0211-000CN
Holder - Paper pickup arm - Pickup and feed roller holder for Tray 2 paper pickup assembly
RC1-0212-000CN
Holder - Paper pickup arm holder - Holder for pickup roller shaft
RC1-0264-000CN
Bushing - Feed roller shaft bushing - Bushing on right side of printer that supports the feed roller shaft.
RC1-0153-030CN
Guide - Right side Tray 2 paper cassette guide
RC1-0161-000CN
Flag - Paper size sensing flag - White plastic arm used as mechanical link to tray size sensor PC Board - Three used per sensing assembly
RC1-0206-000CN
Bushing - Bushing - On right side of paper pickup drive assembly
RC1-0060-050CN
Flag - Paper feed sensor flag for Tray 1
RC1-0209-020CN
Flag - Paper sensor flag for Tray 2 paper pickup assembly
RC1-0385-000CN
Guide - Guide for scanner cable 2
RC1-0386-000CN
Guide - Connecting cable guide - Routes and protects all cables running from top portion of printer to the DC controller board
RC1-0500-020CN
Cover - Cover plate - Plastic cover on right front corner of 500 sheet feeder tray - Covers removable tray number designator plate
RC1-0198-000CN
Spring - Tension spring - Provides tension for lifter drive assembly
XA9-1316-000CN
Screw - M4X10 Phillips screw with broad flat washer head - Sheet metal thread
RC1-0344-020CN
Cover - Fan cover - Metal support strap that main cooling fan fastens to - For fan FN101, main cooling fan on right left side of printer
RC1-0270-020CN
Guide - DC Controller board cable guide
RC1-0342-020CN
Holder - Thermistor holder - Plastic inside half of thermistor holder
RC1-0343-020CN
Holder - Thermistor holder - Metal outside half of thermistor holder
RC1-0340-020CN
Guide - Guide for scanner cable 1
RC1-0714-000CN
Arm - Front door stop arm - Thin plastic arm between the front door and the lower frame - Provides a positive stop when the front door is opened
RC1-0748-000CN
Sensor - Paper size sensor block - Spring loaded block which activates the paper size sensor fingers
RU5-0045-020CN
Gear - 18 tooth gear - Located on right side of printer in the Tray 2 paper pickup assembly
XB4-7300-605CN
Screw - Screw - 6 mm Phillips head screw with attached washer
RC1-0213-000CN
Spring - Compression spring - Provides pressure for paper pickup and feed rollers in Tray 2 pickup assembly
RG1-4213-000CN
Cable - Top Cover cable - From top cover microswitch (SW101) to DC Controller board
RG1-4239-000CN
Cable - Interface cable assembly - Connects between the 6-pin interface connector and the feeder control board
RG1-4240-000CN
Cable - Media size sensor cable assembly - Connects between the paper size sensor assembly and the feeder control board
RG1-4241-000CN
Cable - Front door sensor cable - Connects between the sensor in the feeder lifter drive assembly and the feeder control board
RF5-3898-000CN
Lever - Laser scanner shutter lever - Four used
RU5-0088-000CN
Gear - 18 tooth gear - Located on right side of printer in the 500 sheet tray paper pickup assembly
RC1-0244-000CN
Guide - Support guide - Supports right rear side of power supply board
RL1-0007-000CN
Pad - Tray 1 paper separation pad
RM1-0053-000CN
Shutter - Left side shutter assembly - Blocks light from scanner on left side
Q2431A-Manual
Service_Guide_PH - HP LaserJet 4300 Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.
RM1-0103-060CN
Roller - Fixing film assembly - Includes heating element, heating element housing tube and fuser film sleeve - 110 volt
RC1-0290-000CN
Cover - Lower rear cover - Covers rear of standard 500 sheet tray