HP LaserJet P2014 Parts Share Fromhttp://www.printerparts-hp.com publisherJacky Issue Time Sep 17,2012 PartDescriptionJ7942GPrint_Server - HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power moduleJ7942APrint_Server - HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - power moduleRM1-4262-000CNLaser_Scanner - Laser/Scanner assembly - Mounts on top of print structureQ5931ATray - Optional 250-sheet paper tray assembly - Includes base assembly and removable paper cassette - Adds an additional bottom paper tray (tray 3) to the LaserJetRM1-4274-000CNController - Engine controller board (ECU) - 220VAC - For the Laserjet P2010 printer seriesRM1-4247-020CNFuser_Assembly - Fuser Assembly - Bonds toner to paper with heat - For 110-127VAC (+/- 10%) operationJ6035CPrint_Server - HP JetDirect 175X Fast Ethernet external print server - Has on 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN portQ7553XCartridge - HP 53X LaserJet Black Print Cartridge - Prints approximately 7000 pagesRM1-4248-020CNFixing_Assembly - Fuser Assembly - Bonds toner to paper with heat - For 220-240VAC (+/- 10%) operationRM1-4273-000CNPC_Board - Engine controller board (ECU) - 110VAC - For Laserjet P2010 printer seriesCE517AMemory - HP 8MB/64MB 16 Bit Flash/DDR2 SO DIMMRM1-4251-000CNTray - 250-sheet paper input tray 2 cassette - Pull out cassette that paper is loaded intoRM1-4272-000CNCover - Top cover assembly - For the LaserJet P2010 printer seriesRK2-1567-000CNMotor - MOTOR, DC DC Motor - Provides power for drive assembly - Located on the right side of printer - Motor (M1)RM1-4277-000CNCover - COVER, REARRM1-4244-000CNRoller - Registration assembly - Set of rollers before toner cartridge and after feed rollersRM1-4253-000CNDrive_Assembly - Main drive assemblyRM1-4266-000CNDoor - Cartridge door assembly - Complete assemblyRM1-4277-020CNCover - Rear cover assembly - For the LaserJet P2010 printer seriesRL1-1529-000CNCover - Left side cover assembly - For the LaserJet P2010 printer seriesRM1-4263-000CNGuide - Paper feed guide assemblyRK2-1589-000CNFan - Fan assembly - For the LaserJet P2010 printer seriesRL1-1530-000CNCover - Right side cover assembly - For the LaserJet P2010 printer seriesRL1-1525-000CNRoller - Multipurpose paper input tray pick-up rollerRK2-0534-000CNSwitch - Microswitch - Door open switch - SW501RM1-1298-000CNPad - Tray 2 separation pad assembly - Includes the pad on a spring loaded arm in a holder frame - Mounts toward the front of the trayRM1-4255-000CNDrive_Assembly - Duplexing drive assembly - Includes normal rotation drive assembly and reverse rotation drive assemblyRL1-1524-000CNPad - Multipurpose paper input tray separation padRM1-4279-000CNRoller - Transfer roller - Transfer charge rollerRL1-0527-000CNRoller - Top output bin delivery roller assembly - Plastic rod with four rubber wheels (two narrow and two wide)RA0-1090-000CNSpring - Tension springRB2-2897-000CNBushing - Shaft bushing/retainerRK2-0420-000CNSolenoid - 24V DC Solenoid (SL3) - Engages the 'normal' and 'reverse' ratchet gears on the duplex drive gear assembly - Mounts on the right side plate assemblyRM1-4265-000CNRetainer - Paper retainer assembly - Bracket assembly with two flapper levers - Keeps paper in the top output bin from sliding back into the printerRL1-0540-000CNRoller - Paper pickup roller - Includes the D shaped pickup roller spindle with the rubber tire - Does NOT include the idler rollers on each side of the pickup rollerRM1-1283-000CNSensor - Top sensor assembly - Includes the bracket and flags for the top of page detection sensor (PS912), and paper width detection sensor (PS913) - Mounts behind the registration roller assemblyRC2-0419-000CNBase - Multipurpose paper input tray separation pad base - Where the separation pad attaches toRC2-0420-000CNCover - Multipurpose paper input tray pick-up roller cover - Plastic cover that protects the paper pick-up rollerRK2-1587-000CNSolenoid - Multipurpose paper input tray solenoid (SL2)RC1-3470-000CNRoller - Idler roller (plastic) - Free wheeling roller - Two usedRM1-1321-000CNLink - Shutter link assembly - Spring loaded link which engages the shutter on the laser/scanner assembly (blocking the laser beam) when the toner cartridge access door is opened - Mounts on the left front of the laser/scanner support shelfRM1-4245-000CNSensor - Paper width sensor assemblyRC1-3668-000CNLink - GEAR RELEASE LINKRC1-3471-000CNShaft - Drive shaft - Drives pickup rollerRM1-4256-000CNDrive_Assembly - Normal rotation gear assembly - Includes the internal/external geared body, two planetary gears, outer gear with shaft, and the black ratchet gearRU5-0331-000CNGear - 29-tooth gear (White plastic) - Main drive gear for the Fuser Assembly - Mounts on the right end of the Fuser AssemblyRM1-1301-000CNGear - Double gear assembly - Includes the gear body, inset gear (both with a toothless area) and compression spring - For driving the paper pickup rollerRC1-3796-000CNLabel - Transfer Guide Open label - Located on registration roller assemblyRM1-4257-000CNDrive_Assembly - Reverse rotation gear assembly - Includes the internal/external geared body, two planetary gears, outter gear with shaft, and the white ratchet gearRC2-0349-000CNHolder - Fan holder - Holds the cooling fanRC2-0405-000CNArm - Cam arm - Attaches to the drawer connectorXB2-7400-606CNScrew - Screw toothed washer - M4 x 6mm - Used to secure metal components to metal componentsRC2-0426-000CNGuide - Right upper cartridge guideRC1-3665-000CNBushing - Bushing/shaft retainer (Plastic) - Small plastic cylinder with four nubs that twist - Locks into the side frameXA9-1503-000CNScrew - M3 truss head (Flanged) phillips screw (Black oxide finish) - 6mm longXA9-1495-000CNScrew - Wafer head machine screw - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metalRB2-2897-020CNBushing - Shaft bushing/retainerXB4-7401-005CNScrew - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side platesXA9-1504-000CNScrew - M3 truss head (flanged) screw - 8mm longXB4-7300-809CNScrew - M3 self-tapping pan head phillips screw (Black oxide finish) - 8mm longRC2-0334-000CNHolder - Solenoid holder/mount - For solenoid SL2 ? Used on multipurpose trayRC2-0339-000CNGuide - Left lower cartridge guideRC2-0346-000CNGuide - Right lower cartridge guideRC2-0386-000CNHolder - Paper pick-up roller holderRC2-0387-000CNCam - Multipurpose paper input tray left side cam - Small plastic cam that moves inside the paper pick-up roller holderRC2-0388-000CNCam - Multipurpose paper input tray right side cam - Small plastic cam that moves inside the paper pick-up roller holder - Usde on the multipurpose trayRC2-0392-000CNArm - ARM, TAGRC1-3728-000CNHolder - Drawer holder - Right side Tray 2 holder - Also Tray 2 connector mount housingRC1-3794-000CNLabel - Caution label - Do not run staples through the engine - Has graphic of a staple with a red circle/line through itRC1-3472-000CNFlag - Paper sensor flag - cylindrical plastic piece with a flag on each end (One senses the paper, the other activates the photo-sensor)RB2-2895-000CNBushing - Shaft bushing/retainer - Right side pickup roller support bushingRB2-2896-000CNBushing - Shaft bushing/retainer - Left side pickup roller support bushingRC2-1569-000CNGuide - DC cable guide - Attaches to the main drive assemblyRC2-0425-000CNGuide - Left upper cartridge guideRU5-0332-000CNGear - 19-tooth gear (White plastic)RU5-2323-000CNSpring - Compression springRU5-2335-000CNSpring - Compression spring - Applies downward pressure on the memory tag arm to contact the toner cartridgeRU5-2894-000CNSpring - Compression spring - Located on the separation pad base of the multipurpose trayXA9-1420-000CNScrew - M3 pan head phillips screw with captive flat and split-lock washers - 8mm longXA9-1422-000CNScrew - M4 X 12mm machine screw with washerJ7951APrint_Server - HP Jetdirect ew2400 802.11g wireless print server moduleCB450ALaserJet - HP LaserJet P2014 PrinterHC126PECare_Pack - HP 1year Post Warranty Phone Assist LaserJet 1xxx/ P20xx Scanjet 2xxx-6xxx ServiceH2639PECare_Pack - HP 1 year Post Warranty Next business day Onsite LaserJet 1160/ 1320/ P201x Hardware SupportH3110ECare_Pack - HP Network Install Inkjet/Personal LaserJet ServiceH5465ECare_Pack - HP 3year Next business day Exchange LaserJet P2014 P2015 ServiceH5473ECare_Pack - HP 3year Next business day LaserJet P2014 P2015 Hardware SupportRC2-0330-000CNCover - Front cover - Plastic cover located at the buttom of the cartridge door assemblyJ7951GPrint_Server - HP Jetdirect ew2400 802.11g wireless print server module - Includes power supply, USB cable, LAN/Ethernet cable, setup documentation and softwareXA9-1561-000CNScrew - Screw - RS M3 x 6mm - Used to secure metal to metalH5738PECare_Pack - HP 1year Post Warranty Next business day Exchange LaserJet 1160/ 1320/ P201x Service