HP Color LaserJet 1500 Parts Share Fromhttp://www.printerparts-hp.com publisherJacky Issue Time Sep 23,2012 PartDescriptionQ2489AColor_LaserJet - HP Color LaserJet 1500 PrinterRG5-6913-000CNFuser_Assembly - Fuser Assembly (For 220V to 240V operation) - Bonds the toner to the paper with heatRM1-3525-000CNFuser_Assembly - Fuser Assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat - Slides in and locks in lower rear of printerRG5-6880-000CNLaser_Scanner - Laser/scanner assemblyRG5-6890-030CNLaser_Scanner - Laser/scanner assemblyC9704-67901Drum - Imaging drum/transfer assembly cartridge - Inserts into printer through the top door - Life expectancy is 20,000 pages for black print ONLY, 5,000 pages for color (Typical combined life is approximately 6,000 to 8,000 pages)RG5-6903-000CNFuser_Assembly - Fuser Assembly (For 110V to 127V operation) - Bonds the toner to the paper with heatRH3-2252-000CNPower_Supply - Low voltage power supply - For 110V to 127V AC operation - Includes the AC power input connector and power switchC9704ADrum - Imaging drum/transfer assembly cartridge - Inserts into printer through the top door - Life expectancy is 20,000 pages for black print only, 5,000 pages for color (Typical combined life is approximately 6,000 to 8,000 pages)C9705-69003PC_Board - DC controller board - Mounts on the left side of the printer (Behind the formatter board assembly)J6035APrint_Server - HP JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN portRH3-2241-000CNPower_Supply - Low voltage power supply - For 110V to 127V AC operation - Includes the AC power input connector and power switchC9701-67901Cartridge - HP Color LaserJet smart Cyan print cartridge - Will print approximately 5,000 pages at 5% coverageC9702-67901Cartridge - HP Color LaserJet smart Yellow print cartridge - Will print approximately 5,000 pages at 5% coverageC9703-67901Cartridge - HP Color LaserJet smart Magenta print cartridge - Will print approximately 5,000 pages at 5% coverageRH3-2243-000CNPower_Supply - Low voltage power supply - For 220V to 240V AC operation - Includes the AC power input connector and power switchRG5-6910-080CNCarousel - Carousel (Rotary) assembly - Includes the carousel assembly, the support assembly, end plates, drive gears and shaft, sensors, and cablesRG5-6959-060CNPC_Board - DC controller boardC9700-67901Cartridge - HP Color LaserJet smart Black print cartridge - Will print approximately 5,000 pages at 5% coverageRG5-6932-060CNSideplate - Right side plate assembly - Includes the front half of the metal frame assembly, gears, imaging drum/transfer assembly drive cams, cover engaging mechanism, roller engaging clutch (CL2), and main drive motor (DCM701)Q1894-60001PC_Board - Formatter board only - Does not include the metal formatter cage coversRG5-6911-000CNDrive_Assembly - Rotary drive assembly - Includes the carousel rotating motor (DCM703), toner cartridge drive motor (PM705), developing rotary stopper solenoid (SL93), bracket, and gearsC9701ACartridge - HP Color LaserJet smart Cyan print cartridge - Will print approximately 5,000 pages at 5% coverageC9702ACartridge - HP Color LaserJet smart Yellow print cartridge - Will print approximately 5,000 pages at 5% coverageC9703ACartridge - HP Color LaserJet smart Magenta print cartridge - Will print approximately 5,000 pages at 5% coverageRG5-6934-000CNSideplate - Right rear side plate assembly - Includes the rear half of the metal right side plate, the Fuser Assembly drive motor and the three associated gearsRG5-6932-070CNSideplate - Right side plate assembly - Includes the front half of the metal frame assembly, gears, imaging drum/transfer assembly drive cams, cover engaging mechanism, roller engaging clutch (CL2), and main drive motor (DCM701) - Mounts on the right sideRG5-6960-000CNPower_Supply - High voltage power supply board (HVT) assembly - Has contacts for the eight high voltage springs in the printer6R1286Cartridge - YIELD CYAN TONER6R1287Cartridge - YIELD YELLOW TONER6R1288Cartridge - YIELD MAGENTA TONERC9700ACartridge - HP Color LaserJet smart Black print cartridge - Will print approximately 5,000 pages at 5% coverage6R1285Cartridge - YIELD BLACK TONERRF5-4010-000CNMotor - Main motor assembly - Large motor mounted on a controller PC boardRG5-6914-040CNTray - 250 sheet paper tray assembly - Pull out cassette that the paper is loaded into - Does NOT include the paper feed base assemblyRF5-4010-020CNMotor - Main motor assembly - Large motor mounted on a controller PC board - Mounts on the inside of the metal right side frame assemblyRG5-6914-000CNTray - Tray Assembly : 250 sheet paper tray assembly - Pull out cassette that the paper is loaded into - Does NOT include the paper feed base assemblyRG5-6937-000CNTray - Multi-purpose front input tray assembly (tray-1) - Includes the front cover piece, pull-out paper support, and the flip-out extenderRG5-7124-000CNPower_Supply - Sub-high voltage board - Small auxillary PC boardRG5-6900-000CNCover - Top cover assembly (blue plastic) - Includes the molded-in face-down output tray and the lift-up top cover door assemblyRG5-6958-000CNMotor - Rotary motor assemblyRH7-5347-000CNSolenoid - Solenoid assemblyRH7-5341-000CNSolenoid - Solenoid assemblyRG5-6964-000CNPC_Board - Carousel position and toner level photoelectric sensor PC board - 'L' Shaped PC board with the two sensorsRH7-5389-000CNClutch - Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaftRH7-1537-000CNFan - Cooling fan (Panaflo Model FBA08T24H - 80mm X 80mm X 15mm high, DC brushless, 24V DC, 190mA)RH7-7158-000CNPC_Board - Density photoelectric sensor PC boardRG5-6915-030CNBody - 250 sheet cassette tray main body assembly - Includes the main structure frame, paper stops, lift plate, springs, and the separation pad assembly - Does NOT include the blue plastic front coverRH7-1629-000CNMotor - Stepping motor - 24V DCRH7-1533-000CNMotor - Stepping motor - 24V DCRH7-1535-000CNMotor - Stepping motor (24V)RB3-0161-000CNRoller - Paper pickup roller assembly - Includes the 'D' shaped rubber roller on a plastic shaftRH7-1625-000CNMotor - Stepping motor - 24VDCRG5-6971-000CNCable - Cable assembly (two 3-pin connectors and a spad lug)8120-6814Power_Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Denmark)RH7-1630-000CNFan - Cooling fan (Panaflo Model FBA08T24H - 80mm X 80mm X 15mm high, DC brushless, 24V DC, 190mA)RG5-6897-020CNRoller - Upper top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, two anti-reversing flaps, and the drive gearRG5-6936-000CNRoller - Lower top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, and the drive gearRG5-6942-000CNSideplate - Left side carousel plate assembly - End plate under the rotational toner cartridge carousel - Includes all of the high voltage contacts for the toner cartridgesRH7-5384-000CNSolenoid - Solenoid assemblyRB3-0028-000CNCover - Left side cover (Quartz Gray) - Does not include any attaching partsRH7-5340-000CNSolenoid - Solenoid assemblyRG5-7609-000CNPC_Board - Carousel position and toner level photoelectric sensor PC board - 'L' Shaped PC board with the two sensorsRG5-7161-000CNCable - Cable assembly (two 3-pin connectors and a spad lug)C6518ACable - Universal serial bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) longRG5-6943-000CNPressure_Assembly - Carousel pressure (support) assembly - Includes the main rear support, E-label reader assembly, engaging sensor, and the engaging rod shaftRG5-6943-020CNPressure_Assembly - Carousel pressure (support) assembly - Includes the main rear support, E-label reader assembly, engaging sensor, and the engaging rod shaft - Primary support structure for the toner cartridge carouselRG5-7616-000CNPower_Supply - Sub-high voltage board - Small auxillary PC boardRG5-6902-000CNCover - Left side cover assembly (Quartz Gray) plastic - Includes the power switch button, rod and spring (The power switch is located on the low voltage power supply board)RG5-6930-000CNGuide - Lower separation guide assembly - Includes the guide bracket, paper output sensor (PS1) and flag, exit drive shaft with two rubber rollers, shaft gear, and idler gearRG5-6952-000CNRoller - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1)RG5-6939-020CNRoller - Registration roller assembly - Includes the roller, bushings, mounting plate, paper sensor, and the sensor flagRB3-0105-020CNFrame - Center support frame (black plastic) - Support structure for the paper pickup roller, feed roller, and paper sensorsRB3-0129-020CNRoller - Feed roller assembly - Includes the metal shaft and two small rubber rollers - Feeds paper from the paper cassette (or tray three below) into the printer - Mounts on the top of the center frame in the base on the 250-sheet input tray assemblyRF5-4040-020CNRoller - Transfer roller assembly - Long black foam type roller - Transfers static charge to paperRG5-6953-000CNCover - Right side cover assembly (Quartz Gray) plastic - Includes the DIMM memory doorRG5-6931-000CNTray - Face-up output tray assembly - Includes the pull-down door and Fuser Assembly locking bracket (Does NOT include the lock releases)RH7-5366-000CNClutch - Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaftRB3-0109-000CNCover - Front cover for the 250 sheet paper cassette tray (Blue) plastic - Has molded in paper loading instructions and a '2' on the frontRF5-4007-000CNDoor - Top cover door (blue plastic) - For accessing the toner cartridges and the imaging drum/transfer assembly - Mounts to the top cover frameRF5-4049-000CNGuide - Entrance guide assembly - Angled metal guide between the registration roller and the transfer rollerRG5-7612-000CNPC_Board - Top of page photoelectric sensor PC board - Includes the photoelectric top of page sensor and the print engine test switchRG5-7109-000CNCable - Cable assembly (two 7-pin connectors)RB3-0033-000CNDoor - Memory access door (Quartz Gray perforated plastic) - Allows access to the printer memory slots - Mounts on the right side coverRG5-6940-050CNShutter - Registration shutter assembly - Includes the metal roller, mounting frame, grounding springs, and the dual coupling gearRG5-6927-000CNControl_Panel - Control panel assembly (mechanical only) - Includes the 'Rotate Carousel', 'Cancel Job' and the 'Go' buttons, plus the various indicator light pipes - All switches and LED's are on the formatter PC boardRB2-9963-000CNSupport - Separation pad support - Pivoting 'L' shaped metal support frame (Does NOT include the separation pad assembly)RG5-6952-020CNRoller - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1) - Mounts in the lower portion of the front frame assemblyRG5-6942-030CNSideplate - Left side carousel plate assembly - End plate under the rotational toner cartridge carousel - Includes all of the high voltage contacts for the toner cartridges - Mounts on the metal carousel support frameRF5-4012-000CNPad - Separation pad assembly - Includes the separation pad, holder and springRG5-6929-000CNGuide - Separation guide assembly - Includes the plastic guide, label, and the two small spring loaded rollersRB2-9954-000CNGuide - Left paper feed guide (small Black plastic arm)RG5-6967-000CNPC_Board - Registration sensor PC Board - Small board with flag activated photosensorRG5-6919-000CNCover - Right side frame/cover assembly (Quartz Gray) plastic - Includes the right side cover and paper tray guide, the cassette retainer spring, tray 3 connector, printer interface connector, and rubber feetRH2-5524-000CNCable - Flat flexible cable (FFC) assembly8120-6815Power_Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Switzerland)RG5-7131-000CNReader - E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller boardRH7-7146-000CNPC_Board - Density photoelectric sensor PC boardRG5-6951-000CNGuide - Paper guide assembly - Paper width adjustable guide assembly for the multi-purpose front input tray (tray 1)RB3-0035-000CNBezel - Interface bezel (Quartz Gray plastic) - Vertical cover that surronds the interface connectorsRH2-5519-000CNConnector - Connector assembly - For optional paper trayRB2-2897-000CNBushing - Shaft bushing/retainerRG5-6938-000CNGear - Gear assembly - Metal plate with two White plastic gears attachedXD9-0136-000CNClip - Retaining E-ringRG5-6956-000CNReader - E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller boardRG5-6957-000CNReader - E-label reader assembly - Connects cartridge nonvoliatile memory to the DC controller boardRG5-7114-000CNCable - Cable assembly (two 4-pin connectors) with shieldRB2-9916-000CNPlate - Mounting/grounding plateQ2488-00001Plate - Cover plate (metal)Q2488-60104Cable - Flat flexible cableWG8-5382-000CNPC_Board - Sensor PC board - Small board with flag activated photosensorRB3-0108-000CNCross_Brace - Metal support cross-brace - Mounts on the top rear of the left and right support frame/cover assembliesRB3-0120-000CNCover - Solenoid cover (Steel) - For magnetic wave sheildingRH7-7149-000CNThermistor - ThermistorRB2-9808-000CNBushing - Bushing/shaft retainer assembly - Black plasticRB3-0089-000CNArm - Top cover rack arm (Black) - Plastic arm with teeth on bottom edge - Disengages the imaging drum/transfer assembly drive cams when the top door is openRF5-4258-000CNPad - Separation pad assembly - Includes the gray plastic frame with the rubber insert stripWT2-5056-000CNClip - Cable clip - 'C' shaped White plasticRB2-3041-000CNHinge - Tray hinge - For the left side of the multi-purpose front input tray (tray one)RB2-3042-000CNHinge - Tray hinge - For the right side of the multi-purpose front input tray (tray one)RG5-6968-000CNPC_Board - Interconnecting feed drive PC boardRB3-0129-000CNRoller - Feed roller assembly - Includes the metal shaft and two small rubber rollersRG5-6907-030CNSupport - Laser/scanner support assembly (sheet metal plate)RB1-8668-030CNBelt - Feed guide drive belt - Small belt approximately 5/16 inch wide with 'A' shaped ribs on itJ6061APrint_Server - HP JetDirect 380X external IEEE-802.11b (Wi-Fi) wireless print server - Connects to printer using Universal Serial Bus (USB) cable8120-6813Power_Cord - Power cord (dove gray) - 2.3M (7.5ft) long - Has straight (F) receptacle (For 240VAC in the United Kingdom, Hong Kong, Singapore, Malaysia)8120-6809Power_Cord - Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in the U.K., Hong Kong, Singapore, Malaysia)J6038APrint_Server - HP JetDirect 310X external print server - Fast Ethernet Internet connector for sharing network peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB printer port and one RJ-45 10/100 Base-TX connectorRB3-0176-000CNTray - Face-Up output tray door (ONLY)RB3-0019-000CNTray - Toner catch tray (curved Black plastic piece) - Holds residual toner from photosensitive drumRH7-7159-000CNThermistor - ThermistorRG5-7132-000CNReader - E-label reader assembly - Connects cartridge nonvoliatile memory to the DC controller board8120-6812Power_Cord - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 120V in the USA, Canada, Mexico, Philippines, and Taiwan)RB3-0030-000CNCover - Upper rear cover (Quartz Gray) - Mounts on the upper rear of the printer above the face-up output tray doorRB2-9904-000CNAirflow_Guide - Airflow Guide (duct) - Black plastic insert piece which runs the width of the printer and has an air flow hole on right sideRB3-0106-000CNCover - Left side frame/cover (Quartz Gray) plastic - Left side cover and input paper tray guideRB2-6405-000CNHinge - Tray hinge - For the left side of the multi-purpose front input tray (Tray 1)8120-6810Power_Cord - Power cord (Flint Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in Australia, New Zealand)RB2-9955-000CNGuide - Right paper feed guide (small Black plastic arm)RG5-7146-000CNCable - High voltage cable assembly (two 15-pin connectors and two 14-pin connectors)RG5-7108-000CNCable - Cable assembly (two 8-pin connectors, Purple wire)RH7-5337-000CNSolenoid - Solenoid assemblyRB3-0006-000CNHolder - Holder - Housing for the fusing connector assemblyRG5-7122-000CNCable - Cable assembly - 'Y' type cable (three connectors) - The 14-pin connector splits into an 8-pin connector and a 6-pin connectorRG5-7144-000CNCable - Cable assembly (with seven connectors)RB3-0160-000CNRoller - Paper pickup roller ('D' shaped)RG5-6935-020CNGuide - Left cartridge guide assemblyRB2-6406-000CNHinge - Tray hinge - For the right side of the multi-purpose front input tray (Tray 1)RG5-6938-030CNGear - Gear assembly - Metal plate with two White plastic gears attachedWS1-6336-000CNConnector - Connector assembly - For optional bottom paper trayWG8-5593-000CNSensor - Sensor PC board - Small board with flag activated photosensorRH7-6051-000CNSwitch - Microswitch with lever activatorRB3-0136-020CNShield - Solenoid cover/magnetic shieldRG5-7613-000CNPC_Board - Registration sensor PC Board - Small board with flag activated photosensorRB3-0103-000CNCover - Front lower cover (blue plastic) - Front lower strip below the multi-purpose input tray - Has recessed area for the printer logoRG5-7106-000CNCable - Cable assembly (two 2-pin connectors)8120-6811Power_Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 220V in Europe, Saudi Arabia, South Africa, India, and Korea)RB3-0032-000CNCover - Face-down paper output L-Shaped cover ( Blue) - Serves as the rear of the tray for the face-down output tray on top of the printerRB3-0025-000CNAirflow_Guide - Airflow guide (duct) / fan holder bracket assembly (Quartz Gray plastic)5090-3379Cleaner - Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spillsRB2-6248-000CNDamper - Damper assembly (Gray plastic piece with small 13-tooth gear on it)RB2-2843-000CNSpring - Torsion spring - Provides a small amount of back pressure for the paper sensor flag. (Flag sold separately RB2-6264-000CN).RH2-5520-000CNConnector - Connector for the Fuser Assembly - Seven small contol pins plus three separated high current pinsRB3-0102-000CNCover - Front inner cover (Blue) - Mounts on the front frame above the multi-purpose input trayRB3-0104-000CNCover - Roller cover - Covers the multipurpose paper pickup roller assembly - Mounts on the lower front of the front frame assemblyRB2-4933-000CNShaft - Lock release shaft - Small shaft with locking tab - Does NOT include the lock release leverRG5-7149-000CNCable - Connector assembly - Includes the 14-pin (F) interface connector and cable assemblyRG5-6965-000CNPC_Board - Waste toner sensor PC board - Small board with an LED and photoelectric sensor - Monitors the level of the excess toner deposited in the imaging drum/transfer assemblyRG5-7145-000CNCable - Front cable assembly (six connectors)RB2-2973-000CNBushing - Support bushingRB3-0057-000CNPlate - Transfer slide plate - Small 'U' shaped metal insert platesRF5-4258-020CNPad - Separation pad assembly - Includes the gray plastic frame with the rubber insert strip - For the cassette on the 250-sheet and 500-sheet input tray assemblies - Mounts in the paper cassette tray assembly.RB3-0090-000CNRack_Slide - Rack slide - White plastic piece with gear teeth layed out in rack form on both sidesRB3-0089-030CNArm - Top cover rack arm (Black) - Plastic arm with teeth on bottom edge - Disengages the imaging drum/transfer assembly drive cams when the top door is openRB2-2892-000CNRoller - Guide roller (Free spinning white plastic roller) - Mounts on the paper pickup drive shaft on each side of the pickup 'D' shaped rollerRB3-0063-000CNBelt - Paper feed belt - Small black rubber belt approximately 1/8 inch wide with little 'A' shaped ribs on itRB3-0121-000CNSpring - Right retaining spring - Helps to secure and ground the imaging drum/transfer assembly in the printerRB3-0056-000CNInsulator - Insulating sheet (Transparent plastic)RB3-0010-030CNPlate - Feed plate - Center metal plate with slots that the ribs on the middle frame assembly go throughRG5-7130-000CNCable - High voltage cable assemblyRB3-0108-020CNCross_Brace - Metal support cross-brace - Mounts on the top rear of the left and right support frame/cover assemblies - For the base on the 250-sheet input tray assemblyRB3-0037-000CNRod - Power switch rod - Goes between the power button and the power switch on the low voltage power supply boardRB3-0067-000CNPulley - Pulley roller (accommodates one feed belt) - Small black roller approximately 1.59cm (5/8 inch) long with one ball type pulleyRB3-0091-000CNGear - 16 tooth gear (Black plastic) - Gear with large stop tooth and shaft lock tabRB3-0065-000CNPlate - Contact plate - copper clad metal spring - Holds the left end of the small 500 Meg-ohm resistorRB3-0066-000CNPlate - Contact plate - copper clad metal spring - Holds the right end of the small 500 Meg-ohm resistorRB2-9809-000CNBushing - Bushing/shaft retainer assembly (White plastic)RB2-9903-000CNGuide - Cable guide (Quartz Gray plastic)RB3-0060-020CNShaft - Idler gear shaft - Short metal rodRB3-0061-000CNPulley - Pulley roller (accommodates three feed belts) - Small black roller approximately 3.49cm (1-3/4 inches) long with three ball type pulleysRB3-0062-000CNSupport - PC board support (Black plastic holder)RB3-0015-000CNSpring - Compression springWT2-5737-000CNClip - Drawer connector - Connector located on bottom of tray assembly frame on right side, which connects tray assemblies to each otherRB2-2897-020CNBushing - Shaft bushing/retainerRB3-0178-000CNLever - Right side lock release leverRB3-0179-000CNLever - Left side lock release leverRB3-0282-000CNCover - Inner cover - Covers the small interconnecting PC boardRS7-0428-000CNGear - 30 tooth gear (White plastic)RB1-2190-000CNHook - Pickup roller spring hookRS6-2759-000CNSpring - Compression springRS6-2760-000CNSpring - Compression springRS6-2766-000CNSpring - Tension springRB2-3019-000CNStop - Shipping stopper (bright orange plastic) - Helps to prevent damage to the paper tray by restricting the movement of the lift plate (Removed for normal use)RB2-3043-000CNBushing - Left roller bushing - Acts as the bearing and retainer for the left end of the paper pickup roller assembly (tray 1)RB2-3044-000CNBushing - Right roller bushing - Acts as the bearing and retainer for the right end of the paper pickup roller assembly (tray 1)RS7-0418-000CNGear - 26 tooth gear (Black plastic) - Has 1/8th portion of gear cut awayRS7-0424-000CNGear - Dual gear - 20 tooth / 40 toothRF5-4047-000CNPad - Light blocking pad assembly - Black plastic frame with soft rubber gasket and stiff conductive Mylar piece (grounded)RF5-4035-000CNRoller - Pressure roller and arm assembly - Includes the small white roller, the holding arm, and roller scraperRB2-9908-000CNRoller - Pressure roller (small Black hard plastic disk shaped roller)RB2-9909-000CNRoller - Pressure roller (small Black hard plastic 'solid' roller)RB2-9912-000CNGuide - Top output bin guide - Small curved ribbed black plastic pieceRB2-9924-000CNHolder - Sensor assembly mounting holderRB2-9925-000CNFlag - Sensor arm and flag - Activates the photosensor (Does NOT include the roller)RB2-9932-000CNShield - RFI shield - Parallel wire form mounted over the fanRB2-9942-000CNGround - Grounding plate - Provides grounding for the top-of-page sensor and shielding for the density sensor boardsRB3-0137-000CNGround - Grounding plateRB3-0283-000CNCover - Inner cover - Covers the bottom of the connector that interconnects the input tray base to the printerRB3-0286-000CNPlate - Contact plateRB3-0111-000CNFlag - Paper flag - Plastic rod with paper sensing flag on one end and sensor activator flag on the otherRB3-0119-000CNGround - Grounding plateRB3-0130-000CNFlag - Shaft mounted sensor flag (black plastic)RB3-0132-000CNFlag - Mechanical sensor flag (black plastic)RB3-0135-000CNFlag - Test print flag (Black lever)RB3-0047-000CNSpring - Electrical contact springRB2-9905-000CNSpring - Torsion springRB2-9906-000CNSpring - Torsion springRB2-9952-000CNSpring - Tray 1 flag spring - Provides torsion for the tray 1 paper sensor flagRB3-0007-000CNInsulator - Insulating sheet (Transparent plastic)RB3-0042-000CNSpring - Electrical contact springRB3-0043-000CNSpring - Electrical contact springRB3-0044-000CNSpring - Electrical contact springRB3-0046-000CNSpring - Electrical contact springRB3-0048-000CNSpring - Electrical contact springRB3-0165-000CNCover - Top inner cover (black plastic) - Covers the back half of the pressure roller arms and springsRB3-0166-000CNCover - Bottom inner cover (Black) plastic - One covers the paper feed sensor in the center and the other covers sensor wires toward the right sideRS7-0425-000CNGear - 30 tooth gear (White plastic)RS7-0430-000CNGear - 26 tooth gear - White gear with 1/8th portion of gear cut away and pin for spring tensioningRS7-0435-000CNGear - Dual gear - 32 tooth / 37 tooth (White plastic)RS7-0436-000CNGear - Dual gear - 37 tooth / 43 tooth (White plastic)RB3-0052-000CNCover - Gear Cover (Small Black plastic cover) - Covers the left end of the feed drive shaftRB3-0022-000CNGear - 22 tooth gear (Black plastic) - Small gear with diagonally cut teethRB3-0023-000CNHolder - Interlock switch holder (Quartz Gray plastic) - Does NOT include the micro-switchRS7-0431-000CNGear - 15 tooth Gear (white plastic)RS7-0437-000CNGear - 51 tooth gear (White plastic)RB3-0009-000CNStatic_Dissipater - Static eliminator ground plate - Right angled metal piece with small teeth on top edgeRB3-0011-000CNShaft - Feed drive shaft - Long shaft with eight feed belt ball type pulleys and one ribbed feed guide drive belt pulleyRB3-0012-000CNRoller - Belt roller - Small oval shaped roller approximately 1-3/4 inches longRB3-0014-000CNBushing - Bushing assembly (black plastic bushing with small guide roller on top)RS7-0426-000CNGear - Dual gear - 26 tooth / 50 tooth (White plastic)RS7-0429-000CNGear - 26 tooth gear (White plastic) - Has recess for shaft drive pinRS5-1637-000CNBushing - Bushing (black plastic)RS5-1638-000CNBushing - BushingRB3-0092-000CNGear - 15 tooth gear with drive shaft (Black plastic)RB2-6297-000CNFoot - Rubber foot - Square self-adhesive rubber footRS5-1635-000CNBushing - Shaft bushingRS5-1636-000CNBushing - Shaft bushingRB2-2895-000CNBushing - Shaft bushing/retainer - Right side pickup roller support bushingRB2-2896-000CNBushing - Shaft bushing/retainer - Left side pickup roller support bushingRB3-0016-000CNSpring - Electrical contact spring - Spring steel wire with compression springs formed on both endsRB2-7195-000CNRoller - Sensor flag roller (small White plastic roller)RS6-2025-000CNSpring - Tensioning springRS6-2030-000CNSpring - Tension springRG5-6974-000CNCable - Cable assemblyRB3-0120-020CNCover - Solenoid cover (Steel) - For magnetic wave sheilding - Mounts over the solenoid on the right side of the front frame assemblyRB2-9916-020CNCover - Cover - For the engaging motor (PM704) - Mounts on the upper left side of the rear frame assemblyRB3-0122-000CNSpring - Left retaining spring - Helps to secure the imaging drum/transfer assembly in the printerRB3-0045-000CNSpring - Electrical contact springRG5-7114-020CNCable - Cable assembly (two 4-pin connectors) with shield - Connects between the cartridge drive motor and the DC controller boardRG5-7107-000CNCable - Cable assembly (8-pin, red wire)RG5-7115-000CNCable - Cable assembly (two 3-pin connectors)RG5-7117-000CNCable - Cable assembly (two 3-pin connectors)RG5-7123-000CNCable - Grounding cable assemblyRG5-7126-000CNCable - Cable assembly (two 5-pin connectors)RG5-7138-000CNCable - Cable assemblyRG5-7139-000CNCable - Cable assemblyRG5-7128-000CNCable - Cable assembly (four 3-pin connectors)RG5-7129-000CNCable - Cable assembly (two connectors and two spade lugs)XD2-1100-502CNClip - E-ring clip5851-1468Other_Parts - GD: LJ PAPER SPECQ2489-40001NamePlate - Nameplate - Color LaserJet 1500 printer logo5851-1468Other_Parts - GD: LJ PAPER SPEC0515-2908Screw - Pan head machine screw with washer - M3.0 x 0.5, 6mm long, Number 2 PhillipsQ1298APaper - LaserJet Satin finish tough paper - A size (8.5 x 11-inches) - Will not tear and will withstand outdoor weather conditions - Can print on both sidesQ1298BPaper - LaserJet Satin finish tough paper - A4 size (21.0cm x 29.7cm) - Will not tear and will withstand outdoor weather conditions - Can print on both sides - 50 sheets per boxQ2489A-ManualService_Guide_PH - HP Color LaserJet 1500 Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.8120-6800Power_Cord - Power cord (Flint Gray) - 16 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 240V in Israel)