HP Color LaserJet CM6030 MFP Parts Share Fromhttp://www.printerparts-hp.com publisherJacky Issue Time Oct 12,2012 PartDescriptionQ3938-60132Scanner - Entire scanner - Does not include power supply, boards, and cableCE664-69004Scanner_Assembly - Scanner assembly - Does not include power supply, boards, and cableQ3938-60161Scanner_Assembly - Entire scanner - Does not include power supply, boards, and cableQ3931-67935Fixing_Assembly - 110-127V FIXING ASS Y Kit Part NumberQ3931-67935Fixing_Assembly - 110-127V FIXING ASS Y Kit Part NumberQ3931-67914Fuser_Assembly - Fuser Assembly - For 110 VAC to 127 VAC - Bonds toner to the paper with heat.Q3931-67915Fuser_Assembly - Fussing assembly - For 220 VAC to 240 VAC - Bones toner to the paper with heatQ3938-67901Carriage - Carriage assembly - Holds and positions print cartridgesQ3931-67927Fuser_Assembly - Fussing assembly - For 220 VAC to 240 VAC - Bonds toner to the paper with heatQ3938-67960PC_Board - Formatter (main logic) board - For HP Color Laserjet CM6040 seriesQ3938-67977PC_Board - Formatter (main logic) board - For HP Color Laserjet CM6040 seriesQ3938-67973Carriage - Carriage assembly - Holds and positions print cartridgesQ7719-67951Memory - HP 256MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patternsQ7720-67951Memory - HP 512MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patternsRM1-4139-000CNPC_Board - Main controller PCA assembly - For the stapler/stacker and booklet maker unitRM1-4178-000CNSaddle - Saddle stapler assemblyRM1-4101-000CNTray - Stapler/stacker tray - Upper tray assembly for the stapler/stacker (output bin 1)RM1-4102-000CNTray - Upper stack tray assembly (output bin 1) - For the booklet maker unit4G3-0670-000CNMount - Motor mount assemblyRM1-6642-000CNPC_Board - DC controller PC board assembly - Mounts on the rear of the print engine frame on the right side of the formatter boardRM1-6642-090CNPC_Board - Assembly-DC Controller PCB R1.84RM1-6642-040CNPC_Board - Replacement for part RM1-6642-000CN DC controller PC board assembly - Mounts on the rear of the print engine frame on the right side of the formatter boardRM1-6642-080CNPC_Board - Assembly-DC Controller PCB R1.84Q3938-67963Panel - Control panel assembly - Control buttons and display located on top front of printer5851-2768Control_Panel - Display control panelQ3938-67910Power_Supply - Power supply assemblyRM1-6642-060CNDC_Controller - Dc controller pcb ass'yRM1-6642-050CNPC_Board - DC controller PC board assembly - Mounts on the rear of the print engine frame on the right side of the formatter boardRM1-4105-000CNTray - Lower stack tray assembly (output bin 2) - For the stapler/stacker and booklet maker seriesQ3938-67902PC_Board - Scanner controller-board (SCB) assembly - Provides timing and control for the flatbed scannerFM2-0721-000CNStacker_Assembly - Staple assembly - For stapler/stacker and booklet-maker unitRM1-4140-000CNPC_Board - Saddle controller PCA assemblyFL2-0846-000CNStacker_Assembly - Stapler unit - Located on the saddle stapler assemblyCB463ATransfer_Kit - HP Color LaserJet Transfer Kit. CP6015/CM6030/CM6040 TRNFR Kit prints approximately 150, 000 pagesRM1-4395-000CNGuide - Intermediate upper feed guide assemblyQ3701-60020PC_Board - Modem PCA - HP LaserJet analog fax accessory 300Q3701-60014Fax_Module - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter boardFM2-0722-000CNStapler - Stapler sub-assembly - Includes upper and lower clinch guide, staple unit and motor (M14), bin sensor flag, photo interrupter (PI46), and staple mountRM1-4109-000CNFeeder - Saddle paper feeder assembly - Includes saddle motor assembly and lower entrance guide assembly - For the booklet makerRM1-4136-000CNFeeder - Saddle paper feeder assembly - Includes saddle motor assembly and lower entrance guide assembly - For the stapler/stackerRM1-3686-000CNGuide - Intermediate lowerr feed guide assemblyRM1-4125-000CNTray - Operation-tray assembly - Includes operational tray cable and photo interrupter (TLP1242)Q3938-67978Hard_Drive - Hard drive - High performance EIO serial ATA hard driveQ3931-67918Tray - 500-sheet paper input tray cassette - For use with tray 2Q3938-67961Hard_Drive - Hard drive - High performance EIO serial ATA hard driveQ7718-67951Memory - 128MB, 100-pin, DDR SDRAM DIMM memory moduleQ3931-67923Tray - 500-sheet paper input tray cassette - For use with Tray 3, 4, or 5Q3931-67919Roller - Paper pick-up roller and retard roller kit - Includes one pick-up roller, one retard roller, and two paper feed rollers - Use with tray 2,3,4, and 5Q3931-67938Roller - Paper pick-up roller - Includes one pick-up roller, and two paper feed rollers - Use with tray 2,3,4, and 5RM1-4119-000CNCover - Middle height cover assembly for the booklet maker unit4G3-0671-000CNPlate - Inner side plate assembly - Used on the booklet market series onlyRM1-4408-000CNCover - Rear cover assembly - Plastic cover that protects the rear air ductQ3938-67969Maintenance_Kit - ADF maintenance kit - Includes the ADF paper pick-up roller assembly and the separation pad assemblyQ3938-67944Maintenance_Kit - ADF maintenance kit - Includes the ADF paper pick-up roller assembly and the separation pad assemblyRM1-3357-000CNCover - Front cover assembly - Plastic cover that protects the front door assemblyFM2-0730-000CNPressure_Assembly - Pressure roller assembly - For the stapler/stacker and booklet-makerQ3938-67964Tray - Duplex switchback trayRM1-4108-000CNGuide - Swing guide assembly - Includes swing roller assembly, swing jam clearing label, swing press assembly, swing roller shaft assembly, and the paper delivery gate armRC2-1278-000CNCover - Rear cover - Plastic cover that protects the rear part of the stapler/stacker unitRM1-4172-000CNGuide - Entrance upper guide assembly - For the stapler/stacker and booklet maker unit4G3-0769-000CNMotor - Ejection stack motor (M32) assemblyRM1-4130-000CNDelivery - Saddle paper delivery assemblyFM2-0756-000CNGuide - Saddle guide assembly - Mounts on the front saddle side plate - For the booklet makerRC1-9871-000CNCover - 1 x 500-sheet paper input tray rear coverRM1-4135-000CNGuide - Lower height guide assemblyQ6999-67902Bin - Booklet delivery binFM2-1409-000CNMotor - Press motor (M36) assembly4G1-2283-000CNCable - Cable, saddle unitRM1-4104-000CNTray - Stack tray assembly - Includes front and rear extension tray guide, stack tray, and extension trayRM1-4404-000CNCover - Internal front door cover assembly - Plastic cover located behind the front door assemblyRM1-3683-000CNCover - Lower left side cover assembly - Located on the intermediate feed main bodyRL1-1477-000CNCover - Lower internal cover assembly - Internal cover for the saddle assembly - For the booklet maker unit only4A3-1783-000CNRoller - Roller, foldingCB459ARoller - 2nd transfer roller assembly - For the laserjet CP6015 and CM6030/6040 seriesRM1-3258-000CNSensor - Color plane registration sensor assemblyRM1-4399-000CNGuide - Rear guide reader assemblyRM1-4121-000CNDoor - Upper cover assembly - Top door located on the stapler/stacker assemblyQ3938-67959Roller - Paper pick-up roller - Includes one pick-up roller, and two paper feed rollers - Use with tray 2,3,4, and 5FM2-0737-000CNMotor - Saddle motor assembly - Includes primary transfer roller disengagement motor(M9) and motor mountFG3-2887-000CNPC_Board - Tray driver PCA assemblyRM1-4123-000CNCover - Inner cover assembly - Inner cover located on the left side of the finisher main bodyRC2-1351-000CNCover - Lower internal cover (stapler/stacker only)Q7829-67910Cover - ADF jam access cover - Located on the left top side of the printer - To remove paper jam from the ADFQ3931-67905Cover - Face down cover - Output paper cover on top of the printer - Holds the paper after it has been printedRM1-4131-000CNGuide - Upper delivery guide assembly - For the saddle assemblyFG3-2892-000CNCable - Cable, solenoidRM1-4110-000CNGuide - Lower entrance guide assembly - Located on the saddle paper feeder assemblyRM1-4129-000CNCover - Upper left cover assembly - Plastic cover that protects the upper left side of the booklet makerRC1-9350-000CNCover - Upper front cover - Large rectangle shaped plastic cover located on left side on the top of the printer4G3-0725-000CNGuide - Motor guide assembly - Located on the saddle assembly - For motor (M3)Q3931-67920Roller - Paper pick-up retard roller - Used for tray 1RM1-4397-000CNHardware - Right assist assemblyRM1-4396-000CNHardware - Left assist assembly4H3-0370-000CNClutch - Electromagnetic shutter clutch (CL31) connector (J1046)RM1-3564-000CNCable - Motor cable - For media feed stepping DC motor (M201)RL1-1272-000CNArm - Auxiliary arm - Mounts on the drive frame on the intermediate paper transfer unit (IPTU)RM1-3563-000CNCable - Motor cable - For media feed stepping DC motor (M202)RC1-9666-000CNCover - Back cover - Located on top of the shield plate on the intermediante feed main body4G3-0934-000CNSensor - Paper face sensor assemblyRU5-6035-000CNGuide - Tray roller guide - Located on the output bin 1RC2-1283-000CNPanel - Upper height panel - Located on the stapler/stacker unitRC1-9695-000CNPlate - Assist arm cap plate - Located on the upper guide assemblyQ7829-67903Motor - PCA motor assemblyRM1-4107-000CNSensor - Area sensor flag assembly - Includes flag area sensor plate - Located on the finisher main body4K1-1103-000CNMotor - Stepping motor (M5) connector (J113)4G3-1777-000CNCable - Staple connecting cable assemblyFL2-0821-000CNSolenoid - Solenoid (SL34) - Buffer rear end holding solenoid drive signalFM2-0763-000CNSensor - Rear end sensor assemblyFC5-5436-000CNRail - Rail rack - Mounts on the finisher main body - Four usedQ7829-67909Foam - ADF reflector foam - White plastic sheet with foam that reflects the light wile scanningXF2-1608-840CNBelt - Timing belt - Located on the return roller assembly4S3-2117-000CNSpring - Tension spring - Provides tension to the front pressure plate (big spring)4G1-2285-000CNCable - Sensor cable - Located on the saddle tray assembly - Connects on the photo interrupter (TLP1242)RC2-1315-000CNCaster - Caster - Used on pedestal assembly (universal)FM2-0720-000CNMount - Flexible cable mount assemblyFM2-1708-000CNSensor - Option sensor assembly - Includes the photo interrupter (TLP1424) and bracketRM1-4394-000CNFan - Chassis fan assembly - Located on the intermediate feed main body - Includes fan and plastic fan bracket (FM8)4G3-0210-000CNLock - Upper cover lock assembly4S3-0171-000CNGear - 50-tooth gear - Located on the saddle assemblyFM2-1417-000CNSensor - Sensor/switch assembly - Includes leaf spring, micro switch (MSW31), photo interrupter (PI32), and wire saddleRM1-3215-000CNLock - Intermediate transfer belt (ITB) rear lock support assemblyRC2-1284-000CNGuide - Side wall guide - Mounts on the upper height panel on the booklet maker unitRM1-3682-000CNGear - Damper gear assembly - Includes 70-tooth gear and one way hinge - Located on the damper assemblyRM1-3228-000CNLock - Intermediate transfer belt (ITB) front lock support assemblyRM1-4398-000CNGuide - Front guide reader assemblyQ7829-67917ADF - ADF float assemblyXF2-3837-340CNBelt - Timing belt - Belt that runs on the 30-tooth pulley on the saddle assemblyQ3938-67952Hinge - ADF hinge assembly - For the top cover on the scanner (document lid)RM1-3240-000CNDrawer - Intermediate transfer belt (ITB) drawer assemblyFM2-0710-000CNSwitch - Approach switch assembly - Includes approach switch plate and microswitch (MS33)FM2-1423-000CNShaft - Swing press shaft assemblyFM2-0707-000CNSensor - Paper sensor assembly - Includes the paper sensor arm, photo interrupter (PI42), and paper sensor plateFB3-7928-020CNDeflector - Paper deflector (flapper 1) - Shaft with curved deflector fingers - Attaches to the front and rear saddle side plateRC2-1347-000CNCover - Slide cover - Plastic cover that slide in to the upper height panel on the stapler/stacker unitRC1-9706-000CNCover - Right cover assist - Located on the lower guide assemblyRM1-3216-000CNHolder - Intermediate transfer belt (ITB) gear holder assemblyFC5-3657-000CNTorque_Limiter - Torque limiter - Torque limiter for the swing press shaftFM2-1639-000CNMount - Delivery switch mount assemblyRM1-4392-000CNRoller - Retard roller - Mounts on the multi-purpose roller assembly next to the limiter torqueRC1-9348-000CNCover - Cover, internal, rightFB5-2697-000CNDeflector - Paper deflector (flapper 2) - Shaft with curved deflector fingers - Attaches to the front and rear saddle side plateRM1-4128-000CNMount - Lattice cable mount assembly4S3-1050-000CNBearing - Ball bearing (6902ZZNR)FM2-0709-000CNHolder - Area sensor holder assemblyRC1-9705-000CNCover - Left cover assist - Located on the lower guide assemblyRC2-1280-000CNCover - Lower left cover - Mounts on the saddle tray assemblyQ3931-67925Lock - Security lock adapter kit4G3-0271-000CNLink - Slide link assembly - Located on the top door assembly (upper cover)4S3-2116-000CNSpring - Tension spring - Provides tension to the front pressure plate (small spring)4G1-1498-000CNSensor - Area sensor PCA assembly - Located on the area sensor holder assemblyFG3-2903-000CNCable - Cable, operation trayRM1-3561-000CNCable - Intermediate paper transfer unit (IPTU) drawer connector cable assembly - Located on the fin lock assemblyFU5-0454-000CNGear - 40-tooth gear - Runs on the swing press shaft assembly - Located between torque limiter and bushing on the rear side plate of the finisherFC5-4221-000CNGuide - Tray roller guide - Mounts on the front side tray plateRM1-4141-000CNPC_Board - LED PCA assembly - Located on the stapler/stacker unit rear coverRM1-3599-000CNCable - MFP AC cable - Has connector J3005 on one side and J301 on the other4A3-1779-000CNPlate - Rotation plate - Located next to the dowel pin on the saddle assemblyRL1-1206-000CNRoller - Pick-up roller - Located on the on the paper pick-up plate assemblyRC1-9607-000CNGuide - Hold guide plate - Located on the left side of the lower guide assemblyRC1-9703-000CNPlate - Rear mount cover plate assemblyFM2-1401-000CNSensor - Shutter sensor assembly4G3-1624-000CNSensor - Paper face sensing assembly - Located on the upper height panel4A3-1955-000CNPlate - Grounding plate - Used only for booklet maker seriesFB3-7881-000CNKnob - Knob - Mounts on the lower internal cover on the left side of the saddle assemblyFC5-6978-000CNPlate - Plate, option tray, frontRM1-3560-000CNCable - Drawer cable - Locaten on the fin lock assembly in the intermediate feed main bodyXF9-0748-000CNBelt - Timing cogged belt - Located on the front side plate on the finisher main bodyRM1-5953-000CNCover - Front internal small cover assembly - Located on the upper right side of the front door assemblyRC1-9649-000CNCover - Blanking cover - Located next to the four bushings on the drive frameRC1-9185-000CNGuide - Intermediate transfer belt (ITB) front entrance guideFC5-5004-000CNSensor - Paper sensing sensor flag - Mounts on the lower height panelFU5-0457-000CNGear - 17-tooth gear - Attaches to the rear tray side plateRC2-1279-000CNCover - Connector tray cover - Mounts on the upper left side of the rear cover on the stapler/stacker unitFU5-1169-000CNBushing - Bushing - Attaches to the rear tray side plate - Located next to the 26-tooth gear on the tray drive shaft assemblyFC5-5024-000CNKnob - Latch knob - Mounts on the open/close guide on the saddle guide assemblyFS6-0829-000CNGear - 16/56-tooth gear - Runs on the folding roller next to the front adjustment armFU5-9059-000CNScrew - M3 X 6mm machine thread screw with attached washer - Used to secure metal to metalXF2-1607-860CNBelt - Timing cogged belt - Runs on ejection stack motor assembly (M32)Q7829-67914Sensor - ADF photo interrupter sensor with connectorFM2-0718-000CNFlag - Entrance sensor flag assembly - Includes the entrance sensor lever and the entrance sensor arm damperRC1-9186-000CNGuide - Intermediate transfer belt (ITB) rear entrance guideFB3-7934-000CNRack_Slide - Rear rack slide - Mounts on the rear saddle side plateFB3-7967-000CNRack_Slide - Front rack slide - Mounts on the front saddle side plate5851-2501Cable - Hard drive power SATA cable - Provides power to the hard drive connects to the mother boardFU5-0435-000CNGear - 44-tooth gear - Mounts on the front tray side plate attached to the upper tray cross memberFS5-3576-000CNGear - 30-tooth gear4A3-1763-000CNArm - Front adjustment arm - Located on the folding roller on the saddle assembly4A3-1764-000CNArm - Rear adjustment arm - Located on the folding roller on the saddle assembly4A3-1782-000CNStop - Lever stopperRC1-9688-000CNGuide - Cable guide - Located next to the paper feed cogged belt on the intermediate feed main bodyRC1-9189-000CNArm - Arm, 1st estrangementFU5-2399-000CNGear - 29-tooth gear - Runs on the paper feeder motor assemblyFS5-3577-000CNPulley - 39-tooth pulley - Runs on the woodruff roller - Located next to the roller flagRC1-9256-000CNTray - Screw tray - Attaches next ot the cable guide ERC2-1356-000CNGround - Grounding plate - Located on the rear left side of the saddle assemblyRC2-1734-000CNLED - LED window - Mounts on the upper left side on the rear cover assembly of the stapler/stacker unitFS6-0830-000CNGear - 16-tooth gear - Runs on the folding roller next to the front adjustment armFU5-3086-000CNPulley - 20-tooth pulleyRU5-0868-000CNGear - 22-tooth gear - Small gear that runs on the paper-feed cogged beltFS6-0822-000CNGear - 16/33-tooth gear - Runs on the shaft located under the folding rollerFU5-0428-000CNGear - 30-tooth gear - Runs on the timing belt on the finisher lower roller next to the 20-tooth pulleyFB3-7980-000CNSpring - Torsion spring - Provides torsion to flag sensor located on the rear saddle side plateFS6-0815-000CNGear - 32-tooth gear/16-tooth pulley - Located on the drive support in front of the motor (M5)FS6-0823-000CNGear - 16-tooth gear - Runs on the shaft located under the folding rollerFS6-2582-000CNSpring - Tension spring - Provides tension to the pressure plate assemblyFC5-5542-000CNGuide - Entrance sheet guide - Mounts on the cross member entrance guideFB3-7925-030CNFlag - Roller flag - Mounts next to the 39-tooth pulley on the saddle assemblyFB3-7973-000CNHolder - Roller holder 2 - For the cam shaftFB3-7979-000CNFlag - Flag sensor - Located on the rear saddle side plate4A3-4715-000CNPlate - Stop hinge plate - Used only for booklet maker seriesFC5-5021-000CNLatch - Right latch clawFB5-5937-020CNFlag - Flag sensor - Located next to the ball bearing (6902ZZNR) - Mounts on the rear saddle side plateFC5-5005-000CNSpring - Torsion spring - Provides torsion to the paper sensing sensor flag located on the lower height panelFS6-0814-000CNGear - 16-tooth gear/32-tooth pulley - Located on the rear part of the lower pass guide next to the 32-tooth gear/16-tooth pulleyXA9-1500-000CNScrew - M3 pan-head Phillips screw with flat washer - 8mm longXD2-3100-152CNRing - C-type external retainer ringXD3-2200-102CNPin - Pin, parallelXD3-2300-142CNPin - Dowel pin - Located next to the 17-tooth gear on the output bin 2XD3-2300-202CNPin - Dowel pin - Locate next to the 50-tooth gearRC1-4585-000CNBushing - Bushing - Located on the side cover assembly (four needed)RC1-9620-000CNPulley - Flange pulley - Attaches to the paper feed cogged belt located on the intermediate feed main body assemblyRC1-9687-000CNHardware - Blanking sheet - Mounts on the shield plateRC1-8734-000CNBushing - Bushing - Located on the registration second transfer assemblyRC1-8567-000CNRoller - Multi-purpose paper pick-up rollerQ7829-67924Roller - Pickup roller high capacity input (HCI) - Attached to the pickup arm - Presses down the paper stack surface to feed the paper one sheet at a time (white)Q7542-60003PC_Board - Formatter (main logic) board - For HP Color Laserjet CM6040 seriesQ3938-67970Cover - ADF jam access cover - Located on the left top side of the printer - To remove paper jam from the ADFQ6998-67901Door - Front door assembly - For the stapler/stacker unitQ6998-67902Tray - Top output bin tray - Stack sub-tray assembly for the stapler/stacker unitQ6999-67901Door - Front door assembly - For the booklet maker unitQ7815-67901Other_Parts - Hebrew font usb solutionQ7815-67902Other_Parts - Cyrillic font usb solutionQ7815-67903Other_Parts - Greek font usb solutionQ7815-67904Other_Parts - Arabic font usb solutionRM1-4113-000CNTray - Booklet-output bin (saddle tray assembly) - Includes sensor cable and photo interrupter (TLP1242)RM1-5949-000CNTray - Lower duplexing tray assembly - Attaches to the paper delivery coverU2014ECare_Pack - HP Network Install high-end LaserJet Multifunction printer ServiceCE664AColor_LaserJet - HP Color LaserJet CM6030 MFP PrinterRM1-3319-000CNRoller - 2nd transfer roller assemblyUL411ECare_Pack - HP 3 year Next business day Onsite Defective media retention CLJ CM6040/6030MFP SupportUL412PECare_Pack - HP 1 year PW Next business day Onsite Defective media retention CLJ CM6040/6030MFP SupportUL624ECare_Pack - HP Secure Hard Disk Installation and Startup ServiceUJ165ECare_Pack - HP 3 year Next business day Onsite Color LaserJet CM6030/40MFP Hardware SupportUJ166ECare_Pack - HP 4 year Next business day Onsite Color LaserJet CM6030/40MFP Hardware SupportUJ167ECare_Pack - HP 5 year Next business day Onsite Color LaserJet CM6030/40MFP Hardware SupportUJ168ECare_Pack - HP 3 year 4 hour response 9x5 OnsiteColor LaserJet CM6030/40MFP Hardware SupportUJ169ECare_Pack - HP 3 year 4 hour response 13x5 OnsiteColor LaserJet CM6030/40MFP Hardware SupportUJ170ECare_Pack - HP 4 year 4 hour response 9x5 OnsiteColor LaserJet CM6030/40MFP Hardware SupportUJ171ECare_Pack - HP 4 year 4 hour response 13x5 OnsiteColor LaserJet CM6030/40MFP Hardware SupportUJ172ECare_Pack - HP 5 year 4 hour response 9x5 OnsiteColor LaserJet CM6030/40MFP Hardware SupportUJ173ECare_Pack - HP 5 year 4 hour response 13x5 OnsiteColor LaserJet CM6030/40MFP Hardware SupportUJ174PECare_Pack - HP 1 year Post Warranty Next business day Onsite Clr LaserJet CM6030/40MFP Hardware SupportUJ175PECare_Pack - HP 1 year Post Warranty 4 hour response 9x5 OnsiteColor LaserJet CM6030/CM6040MFP Hardware SupportUJ176PECare_Pack - HP 1 year Post Warranty 4 hour response 13x5 OnsiteColor LaserJet CM6030/40MFP Hardware SupportUJ189ECare_Pack - HP MKRepl Color LaserJet CM6030/40MFP and CP6015 Color printer fuser 110V ServiceUJ191ECare_Pack - HP Maintenance Kit Replacement Color LaserJet CM6030/40MFP ADF ServiceUJ192ECare_Pack - HP MK Repl Clr LaserJet CM6030/40MFP and CP6015 Color printer TransferKit ServiceUJ573ECare_Pack - HP MK Replacement Color LaserJet CM6030/40MFP and CP6015 Color Roller Kit ServiceUT829PECare_Pack - HP 2 year Post-Warranty Next business day onsite Color LaserJet CM6030 6040MFP Hardware SupportUT980ECare_Pack - HP 4year Next business day Onsite + Defective Media Retention Color LaserJet CM6040/6030 MFP SupportUU861ECare_Pack - HP 5year Next business day Onsite + Defective Media Retention Color LaserJet CM6040/6030 MFP SupportUU927PECare_Pack - HP 1 year Post Warranty Phone Assist High-end Multifunction LaserJet printer ServiceQ3938-60103PC_Board - Assy-faceplate formatterQ3938-60107Overlay - Control panel overlay - Snaps on top of the control panel assembly (English)Q3938-67903Pin - Large pin assemblyQ3938-67904Pin - Small pin assemblyQ3938-67905Inverter - Inverter assemblyQ3938-67906Glass - Scanner glass assembly - Glass plate on which the documents are placed to be scanned - Mounts in the scanner bezelQ3938-67907Sensor - Scanner lid sensor assemblyQ3938-67908Motor - Scanner motor - Drives the optical carriage assemblyQ3938-67909Pulley - Scanner pulley assembly - For transmission timing beltQ3938-67953Diverter - ADF diverter assembly - Diverts paper to duplexer assembly, face up tray or face down delivery assemblyQ3938-67954Cover - Roller cover - Plastic cover that protects the ADF pick-up rollerQ3931-67906Filter - Air filter kitQ3938-67962Guard - Plate, hvt-a guardQ3938-67945Cover - ADF rear end cover assembly - End cover (cap)Q3938-67946Cover - ADF front end cover assembly - End cover (cap)Q3938-67947Holder - Holder, scanner thermistorQ3938-67948Cable - ADF cable assembly - Interconnects the ADF assembly to the flatbed scanner assemblyQ3938-67949Pad - ADF separation pad assembly - Helps separate paper in the ADFQ3938-67950Tray - ADF input paper tray assembly - Holds 50-sheetsQ3938-67951Flag - ADF paper sensor flagQ3938-67911Rod - Scanner rod - Shaft that the scanner carriage assembly rides onQ3938-67912Cable - Flat cable, 28, 940, AQ3938-67913Cable - Flat cable, 28, 970, BQ3938-67914Roller - Roller, paper pick-upQ3938-67915Guide - Rubber guide - For the scanner glassQ3938-67917Gear - Damper, gearQ3938-67918Lever - Lever, paper sensingQ3938-67919Rail - Rail, fixing, frontQ3938-67920Cover - Upper cover - Plastic cover that protects the upper left side of the ADF unitQ3938-67921Cover - ADF lower cover - Plastic cover that protects the lower left part of the ADF unitQ3938-67922Cover - Upper cover - Plastic cover that protects the upper right side of the ADF unitQ3938-67923Cover - ADF lower cover - Plastic cover that protects the lower right part of the ADF unitQ3938-67924Cover - ADF top cover - Plastic cover that protects the top part of the ADF unitQ3938-67925Cover - ADF rear cover - Plastic cover that protects the rear part of the ADF unitQ3938-67926Cover - Front cover - Plastic L-shaped cover were control panel snaps onQ3938-67927Cover - Plastic screw covers with an adhesive back - Covers screw heads that secure the plastic scanner top coverQ3938-67928Hardware - Power supply harnessQ3938-67935Belt - Transmission timing belt - Maintain constant speed during power transmission - Located on the trasmission assemblyQ3938-67936Rail - Rail, reverse, rearQ3938-67937Fan - Cooling fan - Fan that cools the scanner controller board (SCB) areaQ3938-67938Fan - Cooling fan - Fan that cools scanner areaQ3938-67939Fan - Cooling fan - Fan that cools the control panel areaQ3938-67940PC_Board - Copy processor board (CPB)Q3938-67941PC_Board - SCUID board - Located on the havic assemblyQ3938-67942Cable - PCIe Cable - Connects to the SCUID board on havic assemblyQ3938-67943ADF - Automatic document feeder (ADF) whole unit assembly0515-4679Screw - M3 pan-head phillips screw with washer - 6mm long0950-4768Hard_Drive - 80GB SATA hard drive - 7,200 RPM, 3.5-inch form factor, 26.1mm height3030-1103Screw - Screw socket head cap (black) 6,32mm 0.25 inch long